Mitsubishi Electronics LDT37IV (BH544), LDT32IV (BH548) manual Specifications, English-33

Specifications

Specifications (LDT321V) : BH548

Product Specifications			Analog Input	Digital Input
LCD Module		Diagonal:	32"/80.0cm
		Pixel Pitch:	0.511mm
		Resolution:	1366 x 768 dots
		Color:	Over 16 million colors (depending on video card used)
		Brightness:	500cd/m2 (typ.)
		Contrast Ratio:	1200:1 (typ.)
	Response time:		12ms (typ.)
		View Angle:	Up 88°/Down 88°/Left 88°/Right 88°(typ.) @CR>10
Design View Distance:			875mm/34.4inches
Frequency		Horizontal:	31.5kHz - 91.1kHz	31.5kHz - 91.1kHz
Pixel Clock		Vertical:	50.0/58.0 - 85.0Hz	50.0/58.0 - 85.0Hz
			13.5MHz -165.0MHz	25.0MHz - 165.0MHz
Viewable Size			697.69 x 392.26mm/27.5 x 15.4inches
Input Signal		Video:
PC-Input:			Analog RGB Video:0.7Vp-p	TMDS
		Sync:	Input impedance 75ohm
			Separate HV sync: TTL level (Pos./Neg.)
		Input-terminal:	Input Impedance:2.2K ohm	DVI-D (HDCP)
VIDEO Input:			BNC (R,G,B,H,V), 15Pin Mini D-sub
			Composite:1.0Vp-p
			Input impedance 75ohm BNC and RCA-PINJACK-INPUT
			Y/C Y:1Vp-p C:0.286Vp-p Input
			Impedance 75 ohm S-TERMINAL-INPUT
			Component:1.0/0.7Vp-p
AUDIO Input:			Input Impedance 75ohm BNC-INPUT
			RCA PIN-JACK L/R INPUT x 2, STEREO Mini Jack INPUT x 1
RS-232C:		In:	9 Pin Mini D-sub
Output Signal		Video:
PC-Output:			Analog RGB Video:0.7Vp-p with 75 ohm terminated
		Sync:	Separate HV sync: TTL level (Pos./Neg.)
	Output-terminal:		15Pin Mini D-sub
VIDEO Output:			BNC-OUTPUT x 1, Composite 1.0Vp-p with 75 ohm terminated
AUDIO Output:			RCA PIN-JACK L/R OUTPUT x 1, 0.15Vrms with 47k ohm terminated
Speaker Output:			External Speaker Jack 7W + 7W (8 ohm)
Resolutions Supported			640 x 480 at 60Hz to 85Hz
			800 x 600 at 50Hz, 60Hz to 85Hz
			1024 x 768 at 50Hz, 60Hz to 85Hz
			1280 x 768 at 50Hz, 60Hz to 85Hz
			1360 x 768 at 50Hz, 60Hz* to 85Hz
			1280 x 1024 at 60Hz to 85Hz
			1600 x 1200 at 60Hz.....................Maximum Resolution
			* Recommended Resolution
Power Supply			NTSC,PAL,SECAM,4.43NTSC,PAL60 Component:480i,480p,720p,1080i
			1.6 - 0.67A @100 - 240VAC, 50/60Hz
Power Consumption		Power Save:	Max 160W
			Less than 5W (Power button OFF/Main power switch ON)
Operational		Temperature:	5 - 40°C/ 41 - 104°F
Environment		Humidity:	20 - 80% (Without condensation)
Storage		Temperature:	-20 - 60°C /- 4 - 140°F
Environment		Humidity:	10 - 90% (Without condensation)/90%-3.5%x(Temp-40°C) regarding over 40°C
Dimension	Net without stand:		789mm(W) x 476.3mm(H) x 133mm(D)/31.1"(W) x 18.7"(H) x 5.24"(D)
		Net with stand:	789mm(W) x 535.1mm(H) x 246mm(D)/31.1"(W) x 21.1"(H) x 9.69"(D)
		Gross:	930mm(W) x 645mm(H) x 325mm(D)/36.7"(W) x 25.4"(H) x 12.8"(D)
Weight	Net without stand:		35.7lbs/16.2kg (Approximately)
		Net with stand:	38.6lbs/17.5kg (Approximately)
VESA compatible arm		Gross:	51.8lbs/23.5kg
			12 Holes (100mm pitches)
mounting interface			Optional Multi-purpose Fix Mount
Complied Regulatory			UL60950-1/C-UL/TUV-GS/EN60950-1/BSMI/PSB/FCC-B/DOC-B/EN55022-B
and Guidelines			EN55024/EN61000-3-2/EN61000-3-3/C-Tick/CE/GOST
Power Management			VESA DPM
Plug & Play			VESA DDC2B, DDC/CI
Accessories			User's Manual, Power Cord, Video Signal Cable, Remote Controller, AAA Battery x 2,
			Clamper x 2, Screw for Main switch cover x 2, Screw for CLAMPER x 2, Cable Holder,
			Main switch cover

Note: Technical specifications are subject to change without notice.

English-33

English