Onkyo TX-8522, TX-8222 If Remote Controller Signal Does not Reach Other Components

Page 31

TX-85228222_En.book 31 ページ 2006年5月4日 木曜日 午前11時51分

Connecting Components not Reached by the Remote Controller Signals (IR IN/OUT)

In order to use the remote controller to control the receiver from a remote location, you will need to prepare a multiroom kit (sold separately) such as one listed below:

Onkyo’s Multi-Room System kits (IR Remote Controller Extension System)

Multiroom A/V distribution and control system such as those from Niles® and Xantech®

*Xantech is a registered trademark of Xantech Corporation.

*Niles is a registered trademark of Niles Audio Corporation.

Making Sensor Connections

When you place the IR receiver in the main room, connect the cable from the connecting block to the IR IN terminal. Make the connection as shown below. Do not plug any equipment into the power outlet until all the connections are complete.

from connecting block

Mini plug cable

Receiver

If Remote Controller Signal Does not Reach the Receiver Remote Sensor

Effective Sensor Layout

Example for the main room

If the receiver is located inside a cabinet or other enclosure where the infrared rays from the remote controller cannot enter, then operation with the remote controller will not be possible. In such a case, it will be necessary to install a remote sensor at a location outside of the cabinet so that the infrared rays from the controller can be sensed.

 

Connecting

IR Receiver

 

 

IR IN

block

 

 

 

TX-8522/

 

 

TX-8222

Remote controller

 

In the

 

Main room

cabinet

 

 

 

 

 

: Signal flow

Example for the remote zone

The IR IN input allows you to control the receiver from the remote zone with the remote controller even though the remote zone may be on the other side of the building from the main zone. The diagram below shows how to make the proper connections for the remote zone.

To IR IN

IR Receiver

Receiver

Connecting block

Remote controller

Main room

Remote Zone

: Signal flow

If Remote Controller Signal Does not Reach Other Components

Effective Sensor Layout

In this situation, you will need to use a commercially available IR emitter. Connect the mini plug of the IR emitter to the IR OUT terminal on the receiver and then place the IR emitter on the remote sensor of the component or facing it. When the IR emitter is connected, only the signal input to the IR IN terminal is output to the IR OUT terminal. The signal input from the remote sensor on the front of the receiver will not be output to the IR OUT terminal.

 

Connecting

IR Receiver

 

 

IR IN

block

 

 

 

IR OUT

Receiver

 

 

 

 

IR Emitter

 

Remote controller

Other component

: Signal flow

Making Sensor Connections

When you place the IR receiver in the main room, connect the cable from the connecting block to the IR OUT terminal.

Other component

: Signal flow

Remote control sensor

Mini plug

Emitter

IR Emitter

Receiver

31

Image 31
Contents TX-8522/ TX-8222 Avis Important Safety InstructionsPower PrecautionsSupplied Accessories Table of ContentsSupplied Accessories FeaturesInstalling the Batteries Front Panel Getting to Know the ReceiverGetting to Know the Receiver TX-8522 Remote Control jacksRear Panel Satellite antenna on North American modelsDisplay TX-8522 North American model RC-664S Remote ControllerUsing the Remote Controller Remote control sensorRemote Controller Strip about 15 mm 5/8 Connecting Your SpeakersSpeaker Connection Precautions Connecting the Speaker CablesChange the impedance value to 6 ohms using the / buttons Connecting Your SpeakersPress the Setup button on SettingAttach the FM antenna, as shown North American Model Connecting AntennaConnecting the AM Loop Antenna Connecting the Indoor FM AntennaUsing a TV/FM Antenna Splitter Connecting AntennaConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaBefore Making any Connections Connecting Your ComponentsConnecting a Turntable Connecting a CD PlayerRemote Interactive Connecting Your ComponentsConnecting a Recording Component Connecting a DVD Player Connecting a Remote Interactive Dock RI DockConnecting aTV or Other Component with an Audio Output Connecting a VCRConnecting Components Dock, etc Connecting the Power Cords of Other ComponentsConnecting the Power Cord Onkyo CD player, etc Connector Onkyo cassette Deck, etcTurning On and Standby Changing the Input Display Turning On the ReceiverStart playback on the selected To adjust the volume, useEnjoying Audio Sources Press the input selector buttonUsing Headphones Muting the receiver remote controller onlySetting the Display Brightness Using the Sleep Timer remote controller onlySetting the Direct Function TX-8522 only Using the Tone and Balance ControlsEnjoying the Pure Audio Sound TX-8522 only Monitoring the Recorded Sound RecordingPress the DVD input selector button Prepare the camcorder and CD playerFor playback Prepare the VCR for recordingListening to the Radio AM Frequency Step Setup Not North America and EuropeListening to AM/FM Stations Listening to the Radio Presetting AM/FM StationsWhat is RDS? Using RDS European Models OnlyRDS Program Types PTY Finding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP Entering a Name Naming Preset ChannelsCorrecting a Character Making Sensor Connections If Remote Controller Signal Does not Reach Other ComponentsEffective Sensor Layout Troubleshooting Troubleshooting Video Section Specifications TX-8522Amplifier Section GeneralSpecifications TX-8222 Onkyo Europe UK Office Onkyo Europe Electronics GmbH
Related manuals
Manual 72 pages 57.81 Kb

TX-8522, TX-8222 specifications

The Onkyo TX-8222 and TX-8522 are two exceptional stereo receivers that cater to audiophiles and casual listeners alike, offering a perfect blend of performance, versatility, and modern features. Both models stand out in the crowded landscape of audio equipment, making them worthy additions to any home entertainment system.

Starting with the TX-8222, this stereo receiver is designed with a focus on delivering high-quality sound. It boasts a robust power output of 50 watts per channel at 8 ohms, ensuring that it can drive a variety of speakers with ease. One of the key features of the TX-8222 is its adaptive circuitry that minimizes noise and distortion, providing clear audio regardless of the listening environment.

The TX-8222 supports a wide range of audio formats and sources, thanks to its multiple input options. It includes multiple analog audio inputs, a phono input for vinyl enthusiasts, and even digital inputs, allowing seamless connection with modern devices. This versatility makes it an excellent choice for those looking to integrate traditional analog sources with digital media.

On the other hand, the TX-8522 takes performance a step further with enhanced features and power. With a power output of 80 watts per channel at 8 ohms, this model can fill larger spaces with rich sound. The TX-8522 also incorporates advanced circuitry to ensure optimal signal fidelity, further enhancing the listening experience.

Both models feature Onkyo's acclaimed Wide Range Amplification Technology (WRAT), which enhances the overall sound quality by reducing crossover distortion and improving amplifier efficiency. This technology ensures that even the most demanding audio tracks are rendered with precision and clarity.

Connectivity is another strong suit for these models. Each receiver includes Bluetooth capability, enabling wireless streaming from smartphones and tablets, making it easy to enjoy your favorite playlists with family and friends. Additionally, with the inclusion of a user-friendly remote, control over playback and volume adjustments is extremely convenient.

Finally, both receivers come equipped with a classic design that complements any home décor. Their intuitive layout and controls make them accessible even for those less tech-savvy.

In summary, the Onkyo TX-8222 and TX-8522 are impressive stereo receivers that offer high-quality audio, versatile connectivity options, and user-friendly features. They cater to the needs of discerning listeners while providing the flexibility to accommodate modern devices and media, making them ideal for any audio setup.