Mitsubishi Electronics DV158 manual Aut o Exit Enter Auto Exit

DI AMOND VIEW

Aut o Exit Enter

	Auto Exit	Enter
Auto	Automatically adjusts the vertical position, pixel phase,
	horizontal position and pixel clock.
Exit	Return to the main menu or exit the OSD menu without
	saving. Press the exit key when the OSD is not displayed
	to adjust the audio volume.
Enter	Enter sub-menus, select items, save changes.

￿(decrease) Reduce the value of a setting. Move the selection cursor to the left. Press to adjust Contrast if the OSD is off.

￿ (increase) Increase the value of a setting. Move the selection cursor to the right. Press to adjust Brightness if the OSD is off.

To manually adjust the image:

1.Display the adjustment test pattern. This is the best way to observe changes as you adjust the image. Windows users should run the Auto.exe test pattern program provided on the Utilities floppy diskette. For non-Windows operating systems, you also can use the test pattern described in the previous section or another full-screen image, such as the desktop of the operating system.

2.Open the OSD menu by pressing the Enter button on the monitor.

3.Press ￿ or￿ to select the Geometry submenu and then press Enter.

4.Press ￿ or￿ to select Clock and then press Enter.

5.Check the current setting. Increase or decrease the sampling clock to 13