Mitsubishi Electronics HC1100 manual Setting range differs depending on the input signals

9)Menu setting commands (Not executable in stand-by mode. Possible only to read during muting.)

The menu setting commands are used for the menu setting of this projector. If the personal computer sends the command without attaching the data code, the projector attaches to the received command it’s current setting value as the data code and send it back to the PC.

ITEM	ASCII	HEX				VALUE
GAMMA MODE	GS	47h	53h			0	(SPORTS), 1 (VIDEO), 2 (CINEMA), 3 (USER1),
						4	(USER2), 5(AUTO)
GAMMA MODE-USER1	GSU1	47h	53h	55h	31h	0(SPORTS), 1(VIDEO), 2(CINEMA),±05±05±05(HIGH, MID, LOW)
GAMMA MODE-USER2	GSU2	47h	53h	55h	32h	0(SPORTS), 1(VIDEO), 2(CINEMA),±05±05±05(HIGH, MID, LOW)
CONTRAST	PP	50h	50h			±30
BRIGHTNESS	QQ	51h	51h			±30
COLOR TEMP.	A	41h				1	(9300K), 2 (6500K), 3 (5900K), 4 (USER),
						5	(HIGH BRIGHTNESS)
COLOR TEMP.-USER	P	50h				±30±30±30(R,G,B)
(CONTRAST)
COLOR TEMP.-USER	Q	51h				±30±30±30(R,G,B)
(BRIGHTNESS)
COLOR	T	54h				±10
TINT	S	53h				±10
SHARPNESS	R	52h				±05
BrilliantColorTM	WEH	57h	45h	48h		0	- 2
SCREEN SIZE	SCR	53h	43h	52h		0	(16:9), 1 (CINEMA SCOPE 2.35:1)
VERTICAL LOCATION	IMP	49h	4Dh	50h		±26
LAMP MODE	LM	4Ch	4Dh			0	(STANDARD), 1 (LOW)
AUTO POWER ON	APON	41h	50h	4Fh	4Eh	0	(OFF), 1 (ON)
AUTO POWER OFF	APOF	41h	50h	4Fh	46h	00 (OFF) , 05, 10, 15, 30, 60
SPLASH SCREEN	SS	53h	53h			0	(OFF), 1 (ON)
BACK COLOR	BB	42h	42h			0	(BLACK), 1 (BLUE)
IMAGE REVERSE	IR	49h	52h			0 (OFF), 1 (MIRROR), 2 (INVERT), 3 (MIRROR INVERT)
TRIGGER OUT	SCT	53h	43h	54h		0	(OFF), 1 (ON)
TEST PATTERN	TP	54h	50h			0	(OFF), 1 (CROSS HATCH)
ASPECT	SC	53h	43h			0	(AUTO), 1 (4:3), 2 (16:9), 3 (ZOOM1), 4 (ZOOM2)
						5	(STRETCH), 6 (REAL)
PASSWORD FUNCTION	PSLOCK	50h 53h 4Ch 4Fh 43h 4Bh				0****(UNLOCK),1****(DISPLAY INPUT),
						2****(MENU ACCESS), ****is a 4-digit figure(password)
MENU POSITION	MP	4Dh	50h			0	(Upper left), 1 (Lower right)
CINEMA MODE	CINE	43h	49h	4Eh	45h	0	(OFF), 1 (AUTO)
VIDEO SIGNAL	VS	56h	53h			0	(AUTO), 1 (NTSC), 2 (PAL), 3 (SECAM) ,
(VIDEO only)						4	(4.43NTSC), 5 (PAL-M), 6 (PAL-N), 7 (PAL-60)
SET UP	STU	53h	54h	55h		0	(AUTO), 1 (OFF), 2 (3.75%), 3 (7.5%)
SCART INPUT	SRT	53h	52h	54h		0	(OFF), 1 (ON)
LANGUAGE	LG	4Dh	47h			0 (		), 1 (English), 2 (Español), 3 (Deutsch) , 4 (Français),
						5 (Italiano),6 ( ), 7 (			), 8 (	), 9(	)
RESET ALL	RSTALL	52h	53h 54h	41h	4Ch 4Ch
HORIZ.POSITION	HP	48h	50h			+:increment, -:decrement *1
VERT.POSITION	VP	56h	50h			+:increment, -:decrement *1
FINE SYNC.	FN	46h	4Eh			00 - 31
TRACKING	TRK	54h	52h	4Bh		+:increment, -:decrement *1
COMPUTER INPUT	CIN	43h	49h	4Eh		0	(RGB), 1 (YCBCR/YPBPR), 2 (AUTO)
OVER SCAN	VOS	56h	4Fh	53h		00-10
HOLD	HLD	48h	4Ch	44h		0	(OFF), 1 (ON)
HOLD BEGIN	HLB	48h	4Ch	42h		00 - 99
HOLD END	HLE	48h	4Ch	45h		00 - 99
CLAMP POSITION	CLP	43h	4Ch	50h		001 - 255
CLAMP WIDTH	CLW	43h	4Ch	57h		01 - 63
VERT.SYNC.	VSC	56h	53h	43h		0	(AUTO), 1 (OFF)
LPF	LPF	4Ch	50h	46h		0	(OFF), 1 (ON)
SHUTTER-U	SHU	53h	48h	55h		00-32
SHUTTER-L	SHL	53h	48h	4Ch		00-32
SHUTTER-LS	SHLS	53h	48h	4Ch	53h	00-95
SHUTTER-RS	SHRS	53h	48h	52h	53h	00-95

*1) Setting range differs depending on the input signals.

•Some commands are not executed depending on the input signal. The operational restrictions same as those on the menu setting are applied. Refer to “Menu operation” in the User Manual for more details.

4