WARNING:
Unplug immediately if there is something wrong with your product.
Do not operate if smoke, strange noise or odor comes out of your product. It might cause fire or electric shock. In this case, unplug immediately and contact your dealer.
Never remove the cabinet.
This product contains high voltage circuitry. An inadvertent contact may result in an electric shock. Except as specifically explained in the Owner’s Guide, do not attempt to service this product yourself. Please contact your dealer when you want to fix, adjust or inspect the product.
Do not modify this equipment.
It can lead to fire or electric shock.
Use the optional specified power supply cord. This apparatus must be grounded.
Place the product more than 5 cm (2 in.) from the wall to prevent blocking the intake, exhaust slots and ventilation of this product because hot air comes out of it.
Carry the product by all four handles, not by two handles.
Do not use the product under the following circum- stances, which may cause fire or electric shock.
•in a dusty or humid place
•near a heater
•in a oily, smoky or damp place
•in direct sunlight
•with high temperature, such as the closed car
•where the temperature is lower than 5°C (41°F) or higher than 35°C (95°F)
CAUTION:
Battery replacement of the optional remote control
•Improper use may result in fire, injury, or spread dirt due to leakage, heat generation, or explosion.
•Replace all the batteries with new ones. Use two AAA batteries (R03).
•Load the batteries with their (+) and
•Load the batteries from
For the LAN terminal;, use an Ethernet cable only.
For your safety, connect to an Ethernet network which does not exceed the voltage limit of the Ethernet connector.
Use “CAT5 STP (Shielded twisted pair) Ethernet ca- ble” for control.
If you use unshielded control cable, it may cause interference with radio and television reception.
Recommended Use
•For optimum performance, allow 30 minutes for
•Rest your eyes periodically by focusing on an object at least 5 feet away. Blink often.
•Clean the monitor surface with a
NOTE:
This product contains a Lithium Battery which contains Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/HazardousWaste/perchlorate/
This symbol mark is for EU countries only. This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV.
Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their
Please, dispose of this equipment at your local community waste collection/recycling centre.
In the European Union there are separate collection systems for used electrical and electronic product.
Please, help us to conserve the environment we live in!
Image persistence
•Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. Image Persistence occurs when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ im- age persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.