Mitsubishi Electronics P91DW Information, Classified by Underwriters Laboratories INC

Page 2

WARNING:

Use the AC power cord recommended as below and a parallel cable (Hewlett Packard C2951A, etc.) so as not to interfere with radio and television reception.

If you use other cables, it causes interference with radio and television reception.

WARNING:

Use the AC power cord according to the recommendations as below,

Case 1, 2, 3 and 4; in order to comply with UL2601-1 and CAN/CSA C22.2 No. 601.1. Case 5; in order to comply with EN60601-1 and EN60950.

Case 1. Connect to the 120V receptacle of the room or the host equipment.

The AC power cord should be UL or CSA approved and consist of type SJT, size 16 or 18AWG, length 2.5m or shorter cord with IEC320/C13 type, 125V 10A or higher rating connector and NEMA 5-15 type, 125V 10A or higher rating, Hospital Grade plug.

Case 2. Connect to the 230V receptacle of the room or the host equipment.

The AC power cord should be UL or CSA approved and consist of type SJT, size 16 or 18AWG, length 2.5m or shorter cord with IEC320/C13 type, 250V 10A or higher rating connector and NEMA 6-15 type, 250V 10A or higher rating, Hospital Grade plug.

Case 3. Connect to the 120V receptacle of the host equipment.

The AC power cord should be UL or CSA approved and consist of type SJT, size 16 or 18AWG, length 2.5m or shorter cord with IEC320/C13 type, 125V 10A or higher rating connector and IEC320-2.2/E type, 125V 10A or higher rating plug.

Case 4. Connect to the 230V receptacle of the host equipment.

The AC power cord should be UL or CSA approved and consist of type SJT, size 16 or 18AWG, length 2.5m or shorter cord with IEC320/C13 type, 250V 10A or higher rating connector and IEC320-2.2/E type, 250V 10A or higher rating plug.

Case 5. Connect to the 230V receptacle of the room or the host equipment.

The AC power cord should be VDE approved and consist of core size 1mm2 or bigger, length 2.5m or shorter cord with IEC320/C13 type, 250V 10A or higher rating connector and CEE(7)VII type or IEC 320-2.2/E type, 250V 10A or higher rating plug.

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his or her own expense.

Information:

This class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

"CLASSIFIED BY UNDERWRITERS LABORATORIES INC.®

WITH RESPECT TO ELECTRIC SHOCK, FIRE AND MECHANICAL HAZARDS ONLY IN ACCORDANCE WITH UL2601-1 AND CAN/CSA C22.2 No. 601.1"

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Digital Monochrome Printer Information Classified by Underwriters Laboratories INCPage Contents Precautions Power RequirementFor Long Operating Life Safety Technical Checks Remove the cushion above the unit Unwrap the unit AccessoriesUnpacking Front Panel Name Function ReferenceDFE Rear PanelPull out the paper end Installation of PaperLoad the paper roll Close the door Cut the paper endDo not slack the roll paper Adjust the paper position correctlyDo not use defective paper Example of Connection Mode switch settingInstalling printer driver ConnectionPrinting Printing procedure1Turn on the power 3Cut the printed paper Copy printingFront panel, you can feed the paper Paper saving modePaper feeding Selection of Gamma γ Curve Adjustment of Print PictureIndicator/Adjustable Item Adjustable contents Setting of Function Mode Tion printing ErrorMode Cause/Error display Symptom/Remedy Button input Error DisplaySymptom/Remedy When the door opens, an alarm tone is given Cause/Error display Symptom/RemedySymptom Left Side LED display Right Set state/Mode LED display Contents of rightStatus and Modes Insert the cleaning paper 56Press the Feed button USE of Cleaning PaperTurn on the power 4Close the door Take out the cleaning paperParallel Terminal Signal Parallel Data InterfaceFrom/To Function Pin No HostClk Parallel input connector port Signal allocation Signal ECP Maintenance Turn off the power for maintenance Maintenance of Main UnitSpecifications French Branch Mitsubishi Electric Europe B.V UK BranchGerman Branch Italian Branch

P91DW specifications

The Mitsubishi Electronics P91DW projector emerges as a versatile and high-performance device optimized for various presentations and entertainment settings. This projector is particularly well-suited for corporate environments, educational institutions, and even home theaters, thanks to its impressive specifications and cutting-edge technologies.

One of the standout features of the P91DW is its exceptional Brightness and Contrast Ratio. With a brightness of approximately 3,800 ANSI lumens, this projector guarantees clear and vibrant images, even in well-lit rooms. The high contrast ratio enhances the depth and detail of the visuals, making it ideal for displaying intricate graphics and text during presentations.

The P91DW uses DLP (Digital Light Processing) technology, which is renowned for delivering sharp and stable images. DLP technology reduces the risk of image degradation over time, ensuring that your images remain consistent and reliable throughout the projector's lifespan. This is particularly beneficial for users who rely on their projectors for frequent usage.

In terms of connectivity, the P91DW has a wide array of options, including HDMI, VGA, and composite inputs. This versatility allows it to connect to various devices such as laptops, tablets, and smartphones, making it easy to share content across platforms. Furthermore, the projector supports multiple video formats, ensuring compatibility with various media types.

Another remarkable characteristic of the P91DW is its built-in speakers, which deliver decent audio quality for basic presentations. However, for larger venues or cinematic experiences, users might prefer to connect external audio systems for enhanced sound fidelity.

Portability is another advantage of the P91DW. Weighing in at approximately 3.2 kg, it is lightweight and easily transportable, allowing users to set it up in different locations without hassle. Its compact design also makes it easy to store when not in use.

In terms of maintenance, the P91DW features a long-lasting lamp, which can provide an impressive lifespan, reducing the need for frequent replacements. Additionally, it incorporates a filter that is easy to clean, prolonging the projector's overall performance and effectiveness.

In summary, the Mitsubishi Electronics P91DW projector is a highly capable device that combines brightness, portability, and versatility. Whether for business, education, or home entertainment, its robust features and reliable technology make it an excellent choice for professionals and casual users alike.
Top Page Image Contents