PLUS Vision U5-432 user manual Replacing the Lamp Cartridge

Page 64

Replacing the Lamp Cartridge

•The lamp that is used as a light source in the projector has a limited service life. The rated service life of the lamp is about 2000 hours (when used in normal mode only). This could be shortened depending on conditions of use and other factors.

Note that lamp life will be extended when the projector is often used in Eco mode. (The rated service life of the lamp means the average value of lamp life for lamps that have been manufactured over a long period, and it is derived from test conditions at this company.)

•When the life of the lamp is exceeded, the STATUS indicator lights a steady red and the message [Replace the Lamp Cartridge] is displayed on the screen. When this occurs, it is time to replace the lamp cartridge. Please make the replacement following the procedure below.

•If the projector is used another 100 hours after the lamp’s service life is reached, the power is set to the standby mode and no longer turns on.

•Contact a store that sells the U5-432/U5-332 for a replacement lamp. Indicate you need a U5-200 replacement lamp for the U5-432/U5-332 (order code 28-050).

CAUTION

•Replacement of the lamp cartridge is performed after switching off the power, waiting for the cooling fan to stop, disconnecting the power plug from the power outlet, and then leaving the projector for about 60 minutes before replacement is started. Replacement of the lamp cartridge during operation or immediately after operation stops will cause burns because of the high temperature.

•Do not remove any screws other than those specified.

•Do not touch the lamp with bare hands. Doing so could shorten the life of the lamp.

•If lamp has reached the end of its usable life, the lamp bulb may shatter. When this happens, an explosive sound can be heard and pieces of glass may be scattered in the lamp cartridge. Do not touch them as the pieces of glass may cause injury. If this happens, contact your dealer or the store the projector was purchased.

E-64

Image 64

Contents U5-432/U5-332 Precautions This label is located on the side of the remote controlDOC Compliance Notice Do not look at the laser pointer’s light sourceInstallation Power SupplyCleaning Lamp ReplacementMajor Features Table of Contents Table of Contents Power cable 1.8 m / 5.9 feet Checking the Supplied AccessoriesUSB cable type A, 2 m / 6.6 feet Storage case for projector and accessories Checking the Supplied AccessoriesVelcro strap Pocket Cable storage pouch Names of the Main Unit Parts Zoom ring E-26Built-in Security Slot Names of the Main Unit PartsNames of the Remote Control Parts Inserting the Batteries Remote Control Range Side View6m/19.7feet 5m/16.4feetProcedure Up to Projecting to the Screen Placement Guide U5-432/U5-332 Screen Size and Projection DistancePlacement Guide Lens center Personal computer RGB signal cable Supplied item Connections with Personal ComputerConnecting Personal Computers and Video Equipment To Output the External Output Signal of a Notebook ComputerManufacturer Model Key Connections with Composite Signals Video Equipment with Video ConnectorsVideo Equipment with S-VIDEO Connectors → Video See Input Format on Page E-56Connections with Component Signals Component cable Available as an option Order codeGreen Blue Red Cb Cr Pb Pr Green Blue RedAudio cable Supplied item Audio conversion cable Red Connections with the Audio JackAudio cable Supplied item Switch on the projector power OperatingPower Cable Connections and Switching the Power On/Off Press the Enter button to setThis completes the selection of the display language CursorFinishing Unplug the power cableStandby button on main unit Adjustment of the Projection Screen Adjustment of the Projection ScreenAdjust the projection image to the screen Zoom ringAdjuster button Making Adjustments with the AdjustersFocus ring When Auto Source is On When Auto Source is OffGeneral Operation Input SelectionPress of the Auto button starts the automatic adjustment Automatic AdjustmentGeneral Operation Cancelling Video and Audio Temporarily Freezing a Moving PictureAdjustment of the Volume Image can also be moved in the following circumstances Enlargement of the Image and Video MovementPress the Zoom button to enlarge the image Using the Presentation Timer Using the Laser Pointer OperationConnecting the computer and projector Click button on backJOG buttons Click buttonControlling the Projector from a Computer Use as a High-Brightness Monochrome ProjectorApplicable Projector U5-432 Serial cable D-Sub 9-pin, straight commercially availableProtecting the Projector with the Security Lock Input the password using the number buttons 1 to Canceling the password/Changing the passwordCanceling the password Changing the passwordContent of Adjustments and Settings Using the Quick MenuVolume Menu Operation Method Menu buttonSelect buttons Enter buttonAdjustment Bar and Settings Contents Adjustment BarMenu Screen Names and Functions Menu Operation MethodPerforming Menu Operations Menu Display Press the Menu button to display the menuThis condition al- lows selection of the item name Making Adjustments/SettingsSub menu Selecting Another Menu Name with Remote Control Operation Color ViewMenu name Item Name Sub Menu Setup Color B/W SwitchingVideo OptionPicture Adj. Picture Adjustment ImageBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionReset Press of the Enter button forces the resetFine Picture PositionSelect the preset color mode ColorQuick Color Adj GammaSelection contents at the time of YPbPr input Color TempWhite Color SpaceWhite Balance Personal Computer Signal Video SignalsView AspectVertical Flip / Horizontal Flip KeystoneKeystone Save ViewSetup Color B/W SwitchingAuto Power Off Auto SourceLamp Mode SetupStatus Indicator Menu PositionPresentation Timer To start the timerInput Format Video and S-VideoOption LanguageOn Screen BackgroundSecurity Lock Startup ScreenOption Factory Default Lamp Timer ResetInfo StatusLamp Timer Resolution / FrequencyInfo When an Indicator is Lit or Flashing Thermal ProtectorTroubleshooting Check the following matters before requesting servicingCleaning Cleaning a Soiled Projector Main UnitCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Replacing the Lamp Cartridge Remove the lamp cartridgeMount the new lamp cartridge Reset the Lamp TimerMount the lamp cover Specifications OpticalElectrical MechanicalResolution Frequency Video SignalTable of Supported Frequency Cabinet Dimensions 260 216 Unit mm inch2004