Size and Position Controls

AutoAdjust is unavailable with no image signal or narrow size of image signal input.

Controls

OSM (On-Screen Manager) control buttons on the front of the monitor function as follows:

	Main Menu		Sub-Menu
EXIT	Exits the OSM menu.		Exits to the OSM controls main menu.
	NOTE:	Deactivates the OSM menu and activates the OSM menu when the OSM is
		turned off.

English

CONTROL /

CONTROL -/+

SELECT/

SB MODE

Moves the highlighted area left/right to	Moves the highlighted area left/right to
select one of the sub-menu.	select one of the controls.

NOTE: When the OSM menu is off, it acts as a Hot key for Brightness.

Has no function.		Moves the bar in the – or + direction to
		decrease or increase the adjustment.
NOTE:	Deactivates the OSM menu and to adjust Contrast with Hot key set “ON”
Enters sub-menu.		Has no function.

When the OSM is off, it will act as the SuperBright (SB) function key. User can select between SB MODE OFF, SB MODE1, and SB MODE2. The first time this key is pressed, the current SB Mode is indicated. Within a 3 second window, if this key is selected again, the SB MODE will change to the next SB MODE. For example, the current mode is SB MODE OFF, the key is pressed twice within a 3 second time frame, the SB MODE will change to SB MODE1 and so on. The colour temperature at each SB Mode is adjusted by appropriate colour control except for the sRGB mode whose colour setting cannot be adjusted. When the unit is turned off, it will reset to SB off mode.

Super Bright Mode OFF: for text based images (normal use)

Super Bright Mode-1 ON: for images

Super bright Mode-2 ON: for moving image such as DVD movies

RESET	Resets all the controls within the		Resets the highlighted control to the
	highlighted menu to the factory		factory setting.
	setting.
	NOTE:	When RESET is pressed in the main and sub-menu, a warning window will appear
		allowing you to select the reset function.

Brightness/Contrast Controls

Brightness: Adjusts the overall image and background screen brightness.

Contrast: Adjusts the image brightness in relation to the background.

Degauss: Eliminates the build-up of stray magnetic fields which alter the correct scan of the electron beams and affect the purity of the screen colours, focus, and convergence. When activated, your screen image will jump and waver a bit as the screen is demagnetised.

NOTE: Please allow a minimum of 20 minutes to elapse between uses of the Degauss function.

Constant Brightness: Sustains the brightness and screen colour levels consistently over the normal life of the monitor. The Constant Brightness function requires a 30 minute warm-up of the monitor before the feature is fully functional.

AutoAdjust: Automatically adjust the horizontal and vertical size and position settings for applicable timings.

NOTE:

Left/Right: Moves the image horizontally (left or right).

Down/Up: Moves the image vertically (up or down).

Narrow/Wide: Decreases or increases the horizontal size of the image.

Short/Tall: Decreases or increases the vertical size of the image.

English-5