Function Menus, Monitor-Control Menu | Planar VS15SXAD-TR, VS17SXAD

QUICK LINKS

Contents

FCC Compliance Statement

Index

Ordering Parts

Product Information

Regulatory Compliance

Warranty

GETTING STARTED

About the Display

Unpack Display

Identify Components

Adjust Orientation/Angle

INSTALLING THE DISPLAY

Connect Power

Connect Video

Connect Audio

Connect Touch Screen

Power Management System

USING THE CONTROLS

Overview

Hot Key Functions

OSD Menu

Function Menus

OSD Lockout

APPENDIXES

Technical Information

Supported Timing

Troubleshooting

Function Menus

Analog Mode

Monitor–Control Menu

Monitor-Control.Allows you to adjust the display characteristics such as the horizontal or vertical position, display phase, display clock, and factory reset. Adjusting these settings is necessary if the results from the Auto Adjust function are not satisfactory.

Pressing the Adjust PLUS or MINUS button displays the Monitor-Control submenu. Use the Function UP or DOWN button to select a submenu item.

Auto-Adjust.Select Auto-Adjust to set the display parameters to optimum values.

H-Position.Press the Adjust PLUS or MINUS button to move the display image left or right on a horizontal plane.

V-Position.Press the Adjust PLUS or MINUS button to move the display image up or down on a vertical plane.

Phase. Press the Adjust PLUS or MINUS button to fine-tune the display image.

Clock. Press the Adjust PLUS or MINUS button to adjust the display pixel number alignment.

Reset. Press the Adjust PLUS or MINUS button to reset all the Monitor-Control submenu settings.

Graph/Text. Press the Function Enter button to switch between the text and graphic options.

Port-Select.Switch between analog and digital mode; if no signal comes the Auto-Detection function is activated.

Exit. Press the Adjust PLUS or MINUS button to exit the Monitor-Control submenu.

VS17 Display