Pioneer avic-z2 manual Ejecting a disc, Adjusting the LCD Panel Angle

❒ The built-in DVD drive plays one, standard, 12-	3 Touch [Back].
cm or 8-cm (single) disc at a time. Do not use
an adapter when playing 8-cm discs.
❒ If you cannot insert a disc completely or if an
inserted disc is not recognized, check that the
label side of the disc is up. Press the EJECT
button to eject the disc, and check the disc for
damage before inserting the disc again.	❒ The adjusted angle of the LCD panel will be
❒ If the built-in DVD drive does not operate prop-
	memorized and the LCD panel will auto-
erly, an error message may be displayed.
	matically return to that angle the next time
➲ Error messages ➞ Operation Manual	the LCD panel is opened or closed.
Ejecting a disc
1 Press the OPEN CLOSE button.
The LCD panel opens.
2 Press the EJECT button.
The disc is ejected.
3 Press the OPEN CLOSE button.
The LCD panel closes.
Adjusting the LCD Panel Angle
• When opening, closing and adjusting the
angle of the LCD panel, be careful not to
get your finger caught.
• Do not open and close the LCD panel with
hands by force. This may cause malfunc-
tion.
1 Press and hold the OPEN CLOSE button.
The angle adjustment screen appears.
2 Touch [+] or [–] to adjust the angle.
Five levels of angle are available.

Chapter 2

How to Use the Navigation System and Names of the Parts

15