Planar PT170 manual Touch ScreenDriver Installation, Windows Environment, DOS Environment

20

Touch ScreenDriver Installation

Follows are the procedures for touch screen driver setting up.

Windows Environment

1.Insert the CD-ROM in your computer’s CD-ROM drive.

2.Follow the directions on screen to complete the driver setup for your version of Windows.

* If the AutoStart feature is not active:

1.Click Start > Run

2.Click the Browse button to locate the “touch.exe” program on the CD-ROM.

3.Click Open, then OK to run the “touch.exe”.

4.Follow the directions on screen to complete the driver setup for your version of Windows.

DOS Environment

1.Insert the CD-ROM in your computer’s CD-ROM drive.

2.From DOS, type d:\EloDW to change to the correct directory on the

CD-ROM ( your CD-ROM drive may be mapped to a different driver letter).

2.Type “Install” and press “Enter” to start the installation.

3.Align the touch screen.