Planar PL2011MW manual Connecting the LCD Monitor and Base, Optional Mounting Alternatives

Connecting the LCD Monitor and

Base

When you open the box, place the monitor and put on the desk first. (See fig. 1-1)

nConnect the LCD monitor and base.

oUsing your hand, lock the base and neck by screwing the thread clockwise.

pTo unlock the height adjustment feature of the stand, locate the pin on the back of the stand

column and turn the pin knob counterclockwise.	2
qMount the cable clip for cable management.

Optional Mounting Alternatives

Warning: The monitor stand base may forcefully extend and cause injury. "Full Up" position before removing the monitor stand.

+20

Tilt, Swivel and Pivot Rotation

The LCD Monitor is designed to have a tilt	35
range of -5°to +20°, a swivel range of -35°to
+35°, and a 90° pivot rotation. (See fig. 1-2)	-5

4

hook up the cable clip

3

Remove PIN by turning counterclockwise

Figure 1-1

Raise the monitor to its

90

TOP

35

UP

Figure 1-2

Warning

Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will result in damaging the Monitor and Monitor stand.

Detaching LCD Monitor from Its Stand

Unscrew screws n the swivel base support column and pull downo the hinge to release.

pCable management ring.

1

3

2

Figure 1-3

5