![](/images/new-backgrounds/1269113/26911313x1.webp)
Connecting the LCD Monitor and Base
When you open the box to take the base and put on the desk first. Then connect the LCD Monitor and base please. (See
Figure
Viewing Angle Adjustment
The LCD Monitor is designed to allow users to have a comfortable viewing angle. The viewing angle can be adjusted from
Figure
Warning: Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will result in damaging the Monitor and Monitor stand.
Detaching LCD Monitor from Its Stand
Unscrew screws n the swivel base support column and pull downo the second.
Interface for Arm Applications
Before installing to mounting device, please refer to
The rear of this LCD display has four integrated 4 mm, 0.7 pitches threaded nuts, as well as four 5 mm access holes in the plastic covering as illustrated in Figure
Note :Please using Ø 4mm x 8mm (L) screw for this application.
Figure
100mm x100mm
Screw Mounting Options
100mm
100mm
4mm ,0.7pitch threaded holes x4
Figure
Connecting the Display to your Computer
1. Power off your computer.
2. Connect one end of the signal cable to the LCD Monitor’s VGA port or DVI port.(See Fig
3. Connect the other end of the signal cable to the VGA port or DVI port on your PC.
4. Make sure connection are secure.
Figure
5