Planar PQ150 manual Specifications

Specifications

Display	Flat Panel Active matrix-TFT LCD
	15 inches diag viewable, Anti-Glare coating, 0.3 mm pixel pitch
	Horizontal Viewing Angle: -60 to +60 deg typical
	Vertical Viewing Angle: -45 to +45 deg typical
Sync Input	Horizontal Freq.		30 - 63kHz (Automatic)
	Vertical Freq.		56 - 75Hz (Automatic)
	Input Form		Separate TTL, Positive/Negative
Video Input	Signal Input		15 pin D-Sub Connector
	Input Form		RGB Analog (0.7Vp-p/75ohm)
Resolution	Max		VESA 1024 x 768@75Hz
	Recommend		VESA 1024 x 768@60Hz
Plug&Play	DDC 2B
Power	Normal		:	25W
Consumption	Stand-by/Suspend ≤			3W
	DPMS Off		≤	3W
Dimensions		Full Up Position			Folded Position
&Weight
(with tilt stand)
	width	35.00 cm / 13.78 inches			35.00 cm / 13.78 inches
	Height	31.80 cm / 12.52 inches			33.40 cm / 13.15 inches
	Depth	13.30 cm / 5.24 inches			6.40 cm / 2.52 inches
	Net		2.5 kg (5.51 lbs)
Tilt Range	Tilt		0˚ to 25˚
Power Input	AC 100-240V~ 50/60Hz 0.6A
	Operating Conditions
Environmental
	Temperature		10˚C to 35 ˚C
Conditions
	Humidity		10 % to 80 % non-Condensing
	Storage Conditions
	Temperature		-20˚C to 60 ˚C
	Humidity		5 % to 95 % non-Condensing
Brightness	250 cd/m2 typical
	350:1 typical
Contrast
Power cord	Wall-outlet type
	UL, cUL, FCC
Regulations

NOTE

Information in this document is subject to change without notice.

A13