Planar PL2010M manual Interface for Arm Applications, Power Management System

Page 8

Optional Mounting Alternatives

Detaching LCD Monitor from Its Stand

Unscrew screws n the swivel base support column and pull downo the second.

Figure 1-3

Interface for Arm Applications

Before installing to mounting device, please refer to Fig.1-3.

The rear of this LCD display has four integrated 4 mm, 0.7 pitches threaded nuts, as well as four 5 mm access holes in the plastic covering as illustrated in Figure 1-4. These specifications meet the VESA Flat Panel Monitor Physical Mounting Interface Standard (paragraphs 2.1 and 2.1.3, version 1, dated 13 November 1997).

Note :Please using Ø 4mm x 8mm (L) screw for this application.

Figure 1-4

Power Management System

This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The VESA DPMS provides four power saving modes through detecting a horizontal or vertical sync. signal. When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED indicator will light yellow.

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents PL2010M Planar Systems, Inc Table of Contents Preface FCC Statement WarningImportant Safety Instructions Installation UnpackingConnecting the LCD Monitor and Base Viewing Angle AdjustmentConnecting the Display to your Computer Connecting the AC PowerPower Management System Interface for Arm ApplicationsAdjusting the Monitors Display Display ControlsUser Controls OSD Function MenuFunction Description Ico Function Function DescriptionOSD Lock Out Function How to enter OSD Lock Out function =How to exit OSD Lock Out function = Specifications Technical InformationPlug & Play Standard Timing Table MHZTroubleshooting Problem Picture is unclear and unstablePlanar Systems, Inc
Top Page Image Contents