Planar PL1911M manual Important Safety Instructions

Page 5

Important Safety Instructions

Please read the following instructions carefully. This manual should be retained for future use.

1.To clean LCD Monitor screen;

--Power off LCD Monitor and unplug the AC Cord.

--Spray a non-solvent cleaning solution onto a rag.

--Gently clean the screen with dampened rag.

2.Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can severely damage it.

3.Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.

4.Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be performed by an authorized technician.

5.Store LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). Storing the LCD Monitor outside this range could result in permanent damage.

6.If any of the following occurs, immediately unplug your monitor and call an authorized technician. * Monitor to PC signal cable is frayed or damaged.

* Liquid spilled into LCD Monitor or the monitor has been exposed to rain. * LCD Monitor or the case is damaged.

7.A certified line is required to connect this device to a power outlet. For a nominal current up to 6A and a device weight above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm2 must be used.

Important Recycle Instruction:

LCD Lamp(s) inside this product contain mercury. This product may contain other electronic waste that can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal Laws. For more information, contact the Electronic Industries Alliance at WWW.EIAE.ORG. For lamp specific disposal information check

WWW.LAMPRECYCLE.ORG.

3

Image 5
Contents PL1911M Planar Systems, Inc Table of Contents FCC Statement Warning PrefaceImportant Safety Instructions Unpacking InstallationInterface for Arm Applications Height Adjustment StandTilt, Swivel and Pivot Rotation Connecting the AC Power Connecting the Display to your ComputerConnecting the Audio Cable Setting Up the LCD MonitorOSD Function Menu Adjusting the Monitors DisplayUser Controls Icon Function Function Description Function DescriptionOSD Lock Out Function How to enter OSD Lock Out function =How to exit OSD Lock Out function = Technical Information SpecificationsSize and Weight MHZ Standard Timing TableProblem Picture is unclear and unstable TroubleshootingPlanar Systems, Inc
Related manuals
Manual 17 pages 3.77 Kb Manual 20 pages 14.48 Kb