Planar PT1503Z manual Connecting Video, Connecting the Stereo Speakers optional

Page 10

Planar User’s Manual

Connecting Video

1.Turn off your PC and the LCD Monitor before connecting your LCD Monitor to the computer.

2.Connect the VGA signal cable to the D-sub VGA connector located at the rear of the monitor.

3.Connect the other end of the signal cable to the PC’s VGA port.

4.Make sure the signal cable heads are securely connected to the VGA ports of your PC and Monitor. Tighten the connecting screws to ensure a secure connection.

5.Turn on your computer and LCD Monitor.

Connecting the Stereo Speakers (optional)

Please refer to the following instructions for connecting the LCD Monitor’s stereo speakers.

1.Connect the 1.5M sound cable to the Lineout of your PC’s audio card.

2.Connect the other end of the 1.5M sound cable to the LCD Monitor’s line-in jack.

4

Image 10

Contents PT1503Z Manual Page Preface PrefaceImportant Safety Instructions Planar User’s ManualTable of Contents Page Unpacking Your New Planar LCD MonitorYour New Planar LCD Monitor Identifying ComponentsAC Power Jack Planar User’s Manual Your New Planar LCD Monitor Front ViewPS/2 Connector for Optional Touch Screen Adjusting the Viewing AngleConnecting AC Power Chapter Audio Line In optionalConnecting Video Connecting the Stereo Speakers optionalChapter Connecting the Optional Touch Screen optional Power Management SystemYour New Planar LCD Monitor’s Display Controls Adjusting the Monitor’s DisplayDisplay Controls OSD Main MenuAuto Adjust Procedure Monitor- Control OptionMisc. Control Option OSD Control OptionGraphic Control Option Planar User’s Manual Graph/Text Option OSD ExitPlanar TFT LCD Monitor Specifications Technical InformationTiming for Model PT1503Z XGA Resolution Supported TimingTroubleshooting Troubleshooting Procedures