Planar SD2020 manual Usage Notice, Don’t

Page 2

Usage Notice

To prevent the risk of fire or shock hazards, do not expose this product to rain or moisture.

Do not open or disassemble the product, as this may cause electric shock.

Follow all warnings, precautions, and maintenance as recommended in this user’s guide to maximize the life and performance of your unit.

Do

Turn off the monitors before cleaning.

Use only a dry, soft cloth or clean room wipe when cleaning the LCD panel surface or the half-mirror.

Use a soft cloth moistened with water and/or mild detergent to clean the display housing and stand.

Use only high quality and safety approved AC/DC power adapters.

Disconnect the power plug from the grounded AC outlet if the product will not be used for a long period of time.

Don’t

Do not touch the LCD panel or half-mirror surfaces with sharp or hard objects.

Do not use abrasive cleaners, waxes, or solvents for your cleaning.

Do not operate the product under the following conditions:

In an extremely hot, cold, or humid environment

In areas susceptible to excessive dust and dirt

Near any appliance generating a strong magnetic field

In direct sunlight

SD2020W

ii

User's Guide

Image 2 Contents
SD2020 Usage Notice Don’tBox Contents SD2020W Contents Stereoscopic Viewing Complex data analysisStereoMirror Technology For more information on StereoMirror technology, go to Getting Started Assemble the unitSD2020 Install the mirror-flip PCI card Select a graphics cardConnect the cables Connect the power cords Check the alignmentUser controls and OSD menu Operating in 2D modeProduct Use Video Monitor SpecificationsDisplays Plug and PlayEnvironment Power managementSize and weight Software Compatibility AccessoriesSystem Care CRT Recycling TroubleshootingProblem Possible Solution Warranty Product Registration Important Recycle InstructionsCustomer Service