Planar PX2611W manual Important Safety Instructions

Page 5

Important Safety Instructions

Please read the following instructions carefully. This manual should be retained for future use.

1.To clean the LCD Monitor screen:

--Power off the LCD Monitor and unplug the AC Cord.

--Spray a non-solvent cleaning solution onto a rag.

--Gently clean the screen with dampened rag.

2.Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can severely damage it.

3.Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.

4.Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be performed by an authorized technician.

5.Store the LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). Storing the LCD Monitor outside this range could result in permanent damage.

6.If any of the following occurs, immediately unplug your monitor and call an authorized technician. * Monitor to PC signal cable is frayed or damaged.

* Liquid spilled into LCD Monitor or the monitor has been exposed to rain. * LCD Monitor or the case is damaged.

7.Only use the supplied main lead to connect the monitor. For a nominal current up to 6A and a device weight above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm2 must be used.

Important Recycle Instruction:

Lamp(s) inside this product contain mercury. This product may contain other electronic waste that can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal Laws. For more information, contact the Electronic Industries Alliance at WWW.EIAE.ORG. For lamp specific disposal information check

WWW.LAMPRECYCLE.ORG.

Contains Mercury, Dispose of Properly

3

Image 5
Contents Page Page Contents FCC Statement Warning PrefaceImportant Safety Instructions Unpacking InstallationConnecting the Display Adjust height and angle of Tilt standConnecting the USB Hub Connecting the AC PowerSetting Up the LCD Monitor Power Management System4D+1 Key Function Definition Display ControlsUser Controls OSD Function Menu Adjusting the Monitors DisplayFunction Description User mode adjustable Default is UserAllows you to adjust the Red/Green/Blue color gain Allows you to adjust the Red/Green/Blue color offsetIf video signal is not at the proper timing when Polarity of the input signalMonitor powers on or input signal is changed, this InformationTarget color coordinates OSD Lock Out Function Press Exit Key + Menu Key + Soft power key at same timeOnly repeat this step to unlock Press Exit Key + Menu Key + Up key at same timeTechnical Information SpecificationsDC switch off Mode Power Consumption AC Input LED Color240 VAC DisconnectedSync Total Active Front Back Pixel Timing Name Standard Timing Table75Hz 75.06 915 870 1280x720 Problem Picture is unclear and unstable Troubleshooting
Related manuals
Manual 21 pages 19.76 Kb