Planar LX0801PTI, LX1201PTI, LX1501PTI manual Connecting the Monitor, USB cable at this time

Page 12

Step 2 - Connecting the Monitor

Once the monitor is mounted in place, connect it to the computer (or other

video source) and the regulated DC power supply as follows. Planar does not supply a power supply. The monitor is intended to be powered from the watercraft’s DC power system. Power to the monitor (and CPU) is hard switched from the line power that should be protected by a magnetic hydraulic circuit breaker. DO NOT connect

the USB cable at this time!

Note: This procedure refers to connections to and from the computer. However, depending on your particular hardware configuration, these connections may be to a dock or other device rather than directly to the computer.

1.Install IRtouch software on computer.

2.As needed, route any data and power cables from the computer to the monitor.

3.Make sure the computer is turned off . Connect video cable and USB cable.

4.Connect to the monitor’s power supply.

Note: Use a appropriately sized fuse in line to the power source. Also, to prevent the watercraft’s battery from draining in standby mode, you should install a device that shuts off power to the monitor while the monitor is inactive. (An example is Lind Electronic’s Vehicle Battery Voltage Shutdown Timer - www.lindeletronic.com).

12VDC system: 4A slow blow fuse

24VDC system: 2A slow blow fuse

5.Turn on power to the computer and monitor. The monitor then turns on as soon as it receives a video signal from the computer, and its LED turns green.

Also, the first time the monitor is powered up, it automatically displays a test pattern of repeating colored screens (black, white, red, green, and blue) until a video signal is detected.

Note: For best results, adjust the display mode of the computer to a resolution of 800 x 600 (LX0801PTI) or 1024 x 768 (LX1201PTI and LX1501PTI) and a refresh rate of 60 Hz.

12

LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0512-01A)

Page 11 Page 13
Image 12
Page 11 Page 13
Contents USER’S Guide Important Recycle Instruction Table of Contents Mechanical drawing for LX1201PTI Cleaning the Monitor Usage NoticeA Watercraft or Vehicle Introduction About Planar’s Mariner Touch MonitorsFront Views DC Power Connector Only LTWCD-07BFFA-LL Features Monitor supports standard VGA signal inputPackage Overview Quick Start GuideInstallation Before InstallingKeep the following in mind while installing the monitor Installing the monitor consists of three stepsMounting the Monitor Mounting from rearConnecting the Monitor USB cable at this timeIRtouch Software Installation Page Page Page User Controls Front Panel ControlsUsing the Touchscreen Cleaning the MonitorTurning the Monitor On and Off Navigating the TouchscreenPage Troubleshooting the Monitor AppendixSpecifications Parameter LX1501PTIParameter LX1201PTI Parameter LX0801PTI Addendum a Addendum BAddendum C Addendum D 10MM MIN Thread DepthAddendum E Mounting Holes 5.5MM MIN Thread DepthSupport and Service Planar Systems, Inc
Related manuals
Manual 30 pages 36.19 Kb

LX1501PTI, LX1201PTI, LX0801PTI specifications

The Planar LX0801PTI, LX1201PTI, and LX1501PTI are advanced display solutions designed for various interactive applications, including digital signage, education, and corporate environments. These displays are part of Planar’s commitment to delivering high-quality visual experiences that enhance user engagement and interactivity.

The LX0801PTI features an 8-inch touchscreen display, while the LX1201PTI and LX1501PTI offer larger 12-inch and 15-inch screens, respectively. One of the main characteristics shared across these models is the touch technology, which employs advanced projected capacitive technology. This provides accurate and responsive touch performance, allowing for smooth interactions and gestures, ideal for environments where user engagement is key.

Another significant feature is the displays’ high definition resolution, which ensures crisp and vibrant visuals. This clarity is particularly beneficial in settings where detailed content and sharp graphics are crucial, such as educational presentations or corporate displays. The displays are designed with wide viewing angles, allowing content to remain visible and clear from different perspectives, which is essential for interactive settings and group environments.

The LX series displays are equipped with versatile connectivity options. They support HDMI and USB interfaces, facilitating easy integration with various devices, including computers, media players, and more. This flexibility makes them an excellent choice for creating dynamic presentations and interactive kiosks.

In terms of design, the Planar LX0801PTI, LX1201PTI, and LX1501PTI boast a sleek and modern aesthetic. Their slim profiles and minimal bezels ensure they integrate seamlessly into any environment, whether it’s a classroom, conference room, or public space. The durable touchscreen surface is designed to withstand frequent interactions, making them suitable for high-traffic areas.

Power management is also a noteworthy characteristic of these displays. They are designed to be energy efficient, helping to reduce operational costs while maintaining optimal performance. This commitment to sustainability is increasingly important in today’s environment-conscious market.

In conclusion, the Planar LX0801PTI, LX1201PTI, and LX1501PTI displays combine cutting-edge touch technology, high-resolution visuals, versatile connectivity, and a design tailored for modern environments. These features make them an excellent choice for a variety of interactive applications, ensuring that users can engage with content in effective and dynamic ways. With their robust performance and stylish design, these displays are set to enhance any interactive experience.
Top Page Image Contents