LCD Monitor Rear View | Planar PV174 specs

Planar User’s Manual

2.Monitor Stand

The monitor stand supports the LCD panel.

3.LCD Screen

The LCD monitor screen is a 17.4-inch TFT 1280 x 1024 RGB SXGA screen.

4.LCD Monitor Keypad

Activates and adjusts the monitors settings through an On Screen Display (OSD).

The LCD Monitor — Rear View

1.Stereo Speakers (optional)

The LCD monitor’s built-in stereo speakers are located in the bottom the monitor and face the direction of the desktop.

2.Upstream USB Port (optional)

Connect the AC adapter cable to this jack.

3.Downstream USB Ports (optional)

The monitor’s two downstream USB ports let the LCD monitor function as a USB hub allowing the connection of USB compliant devices. The upstream USB port must be connected to your PC for the downstream ports to function.

4.DC Power Jack

Connect the AC adapter cable to this jack.

5.VGA Cable Connector

Connect the supplied 1.5m 15-pin D-Sub VGA cable to this connector. The opposite end of the cable is connected to your PC’s graphics card.

6.Audio Line-in (optional)

Connect your PC’s line-out to this jack to listen the PC’s audio on the LCD monitor’s stereo speakers. (You can also connect your CD-ROM’s line-out to this jack.)

7.DVI Cable Connector

The 24-pin DVI connector is for Digital signal if your PC has a digital graphic card.