Power-On Indicator, Monitor Stand, LCD Screen

Planar User’s Manual

Your New Planar LCD Monitor — Front View

1.Power-On Indicator

This LED indicator stays lit when the power is on and when the monitor is receiving a proper video signal. The LED will blink slowly when the LCD monitor is in power saving mode.

2.Monitor Stand

The monitor stand supports the LCD monitor.

3.LCD Screen

The LCD monitor screen is a 15-inch diagonal, Acitve Ma- trix Liquid Crystal Display (AMLCD). The screen is capable of supporting a maximum resolution of 1024 x 768 RGB (XGA).

4.LCD Monitor Keypad

Activates and adjusts the monitors settings through an On

Screen Display (OSD).

Your New Planar LCD Monitor — Rear View

1	2	3
1

1.Stereo Speakers (optional)

The LCD monitor’s built-in stereo speakers are located in the bottom the monitor and face the direc- tion of the desktop.

2.Upstream USB Port (optional)

Connect the AC adapter cable to this jack.

3.Downstream USB Ports (optional)

The monitor’s two downstream USB ports let the LCD monitor function as a USB hub allowing the connection of USB compliant devices. The upstream USB port must be connected to your PC for the downstream ports to function.

4.DC Power Jack

Connect the AC adapter cable to this jack.

5.VGA Cable Connector

Connect the supplied 1.5m 15-pin D-Sub VGA cable to this connector. The opposite end of the cable is connected to your PC’s graphics card.