CHANGE SETTINGS
Press and hold CLOCK or ALARM for 2 seconds to enter setting mode. Then, press 
UP or 
DOWN to change each setting. Press and hold to enter fast- setting mode. Press CLOCK or ALARM to switch between settings.
REMOTE UNIT SET UP
Up to 3 remote units can be used with this product to monitor outdoor temperature. The measurement unit (˚C or ˚F) and channel number (1, 2, or 3) switches are located in the battery compartment, and should be set prior to installation.
EN
NOTE Additional remote units sold separately. If you are using more than one remote unit, be sure to select a different channel number for each unit.
INSTALLATION
Mount the remote unit on a flat surface using the recess hole on the back of the unit.
For best results:
·Before you insert the batteries, select the measurement unit and channel number first.
·Place the unit out of direct sunlight and moisture.
9