Onkyo TX-SR501E instruction manual Troubleshooting, Symptom Possible cause Remedy

Page 45

Troubleshooting

 

Symptom

Possible cause

Remedy

 

 

 

 

 

 

The power cord is not connected.

Connect the power cord to a suitable wall outlet

 

 

(page 24).

 

 

 

 

 

 

 

 

 

The [POWER] switch is set to OFF (TX-SR501E

Set the [POWER] switch to ON (page 24).

 

Can’t turn on the

only).

 

 

 

TX-SR501/TX-SR501E?

 

 

 

 

Turn off the TX-SR501/TX-SR501E, wait five sec-

 

 

 

 

 

External interference is affecting the TX-SR501/

onds, then try turning it on again. If that fails, discon-

 

 

TX-SR501E’s digital circuitry.

nect the power cord from the wall outlet, wait five

 

 

 

seconds, reconnect it, then try turning it on again.

 

 

 

 

 

The TX-SR501/TX-SR501E

 

 

 

shuts down immediately

The amp protection system has been activated.

Contact your Onkyo dealer.

 

after being turned on?

 

 

 

 

 

 

 

The buttons on the

Power supply voltage fluctuations and other

Turn off the TX-SR501/TX-SR501E, wait five sec-

 

TX-SR501/TX-SR501E and

onds, then try turning it on again. If that fails, discon-

 

anomalies, such as static electricity, can inter-

 

remote controller don’t

nect the power cord from the wall outlet, wait five

 

fere with normal operation.

 

work?

seconds, reconnect it, then try turning it on again.

 

 

 

 

 

 

 

 

The TX-SR501/TX-SR501E is muted.

Unmute the TX-SR501/TX-SR501E (page 33).

 

 

 

 

 

 

 

Check your connections.

 

 

 

 

 

 

 

If your turntable doesn’t have a built-in phono

 

 

The TX-SR501/TX-SR501E is not connected

preamp, you must connect one between your turnta-

 

 

properly.

ble and the TX-SR501/TX-SR501E.

 

 

 

 

 

 

 

If your turntable uses an MC cartridge, you must use

 

 

 

a compatible phono preamp.

 

 

 

 

 

 

The speaker cables are not connected properly.

Check the speaker connections (page 21).

 

There’s no sound coming

 

 

 

The wrong input source is selected.

Select the correct input source (page 28).

 

from the speakers?

 

 

 

 

A pair of headphones are connected.

Disconnect the headphones (page 33).

 

 

 

 

 

 

 

 

The input signal format is set to PCM or DTS.

Set the input signal format to Auto (page 29).

Amp

 

 

 

 

The volume is set at minimum.

Turn up the volume (page 28).

 

 

 

 

 

 

 

 

The speakers are configured incorrectly.

Check the speaker configuration (page 25).

 

 

 

 

 

 

Some speakers are not used with certain listen-

See page 34 for information on listening modes.

 

 

ing modes.

 

 

 

 

 

 

 

 

 

A connecting cable may be damaged.

Check your connecting cables for signs of damage and

 

 

replace as necessary.

 

 

 

 

 

 

 

 

Only the front speakers are

The Stereo listening mode is selected.

In Stereo listening mode, only the front speakers and

 

working?

subwoofer are used (page 34).

 

 

 

 

 

 

 

 

The center speaker is not connected properly.

Check the center speaker connections (page 21).

 

 

 

 

 

 

The Stereo, Direct, or Orchestra listening mode

The center speaker is not used with these modes

 

The center speaker is not

is selected.

(page 34).

 

 

 

 

The volume of the center speaker is set at mini-

 

 

working or is very quiet?

Check the volume of the center speaker (page 27).

 

 

mum.

 

 

 

The currently selected speaker configuration

Check the speaker configuration (page 25).

 

 

doesn’t use the center speaker.

 

 

 

 

 

 

 

 

 

You’re listening to a mono sound source (e.g.,

 

 

Only the center speaker is

TV or AM broadcast) and the PL II MOVIE or

Select another listening mode (page 34).

 

working?

PL II MUSIC listening mode is selected, so the

 

 

 

 

sound is concentrated in the center speaker.

 

 

 

 

 

 

 

The surround speakers are not used with certain

See page 34 for information on listening modes.

 

 

listening modes.

 

 

 

 

 

 

 

 

 

Surround speaker output depends on the

 

 

The surround speakers are

source material. Some material may not use the

 

 

surround speakers much.

 

 

not working?

 

 

 

 

 

The volume of the surround speakers is set at

Check the volume of the surround speakers (page 27).

 

 

 

 

minimum.

 

 

 

 

 

 

 

 

 

The currently selected speaker configuration

Check the speaker configuration (page 25).

 

 

doesn’t use the surround speakers.

 

 

 

 

 

 

 

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents TX-SR501 TX-SR501E Important Safeguards Precautions Features Supplied AccessoriesAmp Audio/VideoSetting the Voltage Selector Worldwide model only Before Using the TX-SR501/TX-SR501EUsing the Remote Controller Installing the BatteriesFront Panel Controls & ConnectorsDisplay Controls & ConnectorsControls & Connectors Rear Panel Controls & Connectors Remote Controller-RCVR Mode RC-518M North American modelRC-479S other models AV Cables & Connectors Connecting Your AV ComponentsBefore Making Any Connections Optical Digital InputsAudio Connection Formats Video Connection FormatsUsing Composite Video Connecting a DVD playerUsing S-Video Video ConnectionsUsing Optical or Coaxial Connections Connecting Your AV ComponentsUsing Multi-channel Connections Audio ConnectionsConnecting a D-VHS Recorder Connecting Your AV Components Connecting a VCR for PlaybackConnecting a Camcorder, Games Console, etc Connecting Your AV Components Connecting a VCR for RecordingUsing Coaxial or Optical Connections Using Component VideoUsing Analog Connections Turntable without a Built-in Phono Preamp Connecting a Cassette Recorder Connecting a DAT or CD/MD RecorderUsing Coaxial or Optical Connections playback only Turntable with an MC-type Moving Coil CartridgeConnecting -compatible AV Components Connecting -compatible ComponentsExample Installing Your Speakers Positioning Your SpeakersAttaching the Supplied Speaker Labels Connecting Speaker Set a Installing Your Speakers Connecting Your SpeakersConnecting Speaker Set B Strip 5/8 15 mm of insuConnecting Antenna Connecting the Indoor FM AntennaConnecting the AM Loop Antenna Connecting an Outdoor AM Antenna Connecting Antenna Connecting an Outdoor FM AntennaPowering Up the TX-SR501/TX-SR501E Powering Up & Setting Up the TX-SR501/TX-SR501EImportant-First Time Setup Assigning Digital Inputs to Input SourcesPowering Up & Setting Up the TX-SR501/TX-SR501E Setting the Subwoofer ModeSpecifying the Number of Speakers Setting the Crossover Frequency Configuring Speaker Set aSpecifying Speaker Distances Configuring Speaker Set a Adjusting Individual Speaker VolumeUsing Digital Inputs Setting the Input Signal FormatPlaying Your AV Components Selecting the Source AV ComponentUsing the Multi-Channel Inputs Playing Your AV ComponentsEnabling the Tone Controls Using the Tuner Setting the AM Tuning Interval Worldwide model onlyTuning into Radio Stations Presetting Radio Stations Using the TunerSelecting Preset Stations Deleting PresetsCommon Functions Setting the Display BrightnessTurning Speaker Sets On & Off Displaying Source InformationUsing the Sleep Timer remote controller only Adjusting the Speaker Balance TemporarilyUsing Headphones To cancel the sleep timer, pressAbout the Listening Modes Using the Listening ModesBasic Modes Using the Listening ModesSurround Modes DSP ModesDirect button Using the Listening Modes Selecting the Listening ModesStereo button Surround buttonUsing the Audio Adjust Functions Audio Adjust FunctionsAudio Adjust Functions Recording Recording the Input SourceRecording from Different AV Sources RC-479S not North America Using the RC-479SEntering the Manufacturer’s Code RC-518M North America onlyUsing the RC-518M VCR mode TV mode Cable mode Satellite mode CableControl Buttons Input Selectors Symptom Possible cause Remedy TroubleshootingAmp Remote controller Symptom Possible cause Remedy TroubleshootingTuner Recording Others Symptom Possible cause Remedy Onkyo Europe Electronics GmbH Specifications
Related manuals
Manual 48 pages 40.34 Kb

TX-SR501E specifications

The Onkyo TX-SR501E is a versatile home theater receiver that delivers quality audio performance and a range of features designed to enhance your multimedia experience. With a solid build and an array of connectivity options, it caters to both audiophiles and casual users alike.

One of the standout features of the TX-SR501E is its robust amplification system. It boasts a power output of 80 watts per channel, ensuring that your home theater setup receives ample power for a dynamic listening experience. This is complemented by Onkyo’s wide-range amplifier technology, which provides clear and precise sound reproduction across a variety of audio formats. Whether you're watching movies or listening to music, the receiver’s high current capabilities contribute to improved transient response and overall sound clarity.

The TX-SR501E supports multiple audio formats, including Dolby Digital and DTS, making it a great choice for both home theater enthusiasts and music lovers. The receiver is equipped with a 5.1 channel configuration, allowing you to fully immerse yourself in surround sound, perfect for movie nights or gaming sessions. It also includes various sound modes, enabling customization based on your preferences.

In terms of connectivity, the Onkyo TX-SR501E does not disappoint. It features multiple HDMI inputs, allowing for easy connections with modern devices, such as Blu-ray players, gaming consoles, and streaming devices. Additionally, it includes composite and component video inputs, so you can easily integrate older equipment into your setup. The receiver's outputs include a subwoofer pre-out, making it simple to connect an external subwoofer for enhanced bass response.

Another noteworthy characteristic is the inclusion of Onkyo’s own proprietary technologies, such as the Music Optimizer, which enhances the sound quality of compressed audio files. This feature works well with digital music formats, ensuring that your playlists sound as good as possible, regardless of the source.

The user interface of the TX-SR501E is intuitive, featuring an easy-to-navigate remote and an on-screen display that simplifies setup and operation. This makes it accessible for users of varying technical expertise.

Overall, the Onkyo TX-SR501E is a well-rounded home theater receiver that combines power, flexibility, and excellent sound quality, making it an ideal choice for anyone looking to elevate their audio experience. Whether you're a seasoned enthusiast or new to home theater systems, the TX-SR501E offers the performance and features you need to enjoy your favorite media to the fullest.
Top Page Image Contents