Vibrating Device Optional | Oregon Scientific RM818P specs

ANIMATION ON / OFF SETTING

To set the animation on:

1.Press and hold the PROJECTION ON button for 2 seconds.

2.Select the animation speed by using the UP and DOWN buttons.

3.Press the PROJECTION ON button

4.Use the UP and DOWN buttons to select "on" or "off."

5.Press the PROJECTION ON button to confirm.

NOTE The animation feature will move the image of the time, alarm on/off status and alarm time in a cascading and random motion, which is pleasant to the eye.

To flip the projected time upside down:

1.Press the SNOOZE / LIGHT button.

2.While the projector is on, press the SNOOZE / LIGHT button again to flip the time.

3.To flip again, press the SNOOZE / LIGHT button again, etc.

THE VIBRATING DEVICE (OPTIONAL)

The vibrating wake-up device receives a signal from the main unit and performs a wake-up function by vibrating. It is designed to go under your pillow. You can purchase the device separately.

The device has a range of roughly 15 meters and has an LED meter to show data transmission and battery level.

The light on the vibration device will flash in red when the battery is low, and the light will flash in green when the battery power is full.

The switch within the vibrating device can adjust to alarm 1 or alarm 2, or both. Simply select the alarm time when you want the device to wake you up.

RM818P English R7 OP

9/10/04, 3:21 PM

Black