12. Press [MODE] to save the changes and exit. If changes are made during the process, the seconds will reset and start from zero.
The unit will also save all changes and return to normal display automatically after the unit has been left idle for a minute or when
[ALARM] is pressed.
ABOUT THE ALARM
To set the alarm, |
|
| ||
1. | Press | [ALARM] | to enter the Alarm mode. | |
2. | Press and hold | [ALARM] | for 2 seconds. | |
3. | Use | [▲]/[▼] | to enter the hours. |
|
4. | Press | [ALARM] | . |
|
5. | Use | [▲]/[▼] | to enter the minutes. |
|
6. | Press | [ALARM] | . |
|
The alarm will be automatically activated. The | icon will appear | |
on the digital display and the | [ ▲]/[ ▼] when | |
the | analog display. To deactivate the alarm, press | |
the | alarm time is displayed. |
|
GB
HOW TO USE THE DAILY ALARM
The alarm will go off for 2 minutes in a
any key. Pressing [SNOOZE/ 
] will activate the snooze function.
SNOOZE FUNCTION
When the snooze function is activated, the alarm will be muted temporarily and set off again after 8 minutes. To disable the snooze
function, press | [ALARM] | . |
SECTION 3
ADDITIONAL INFORMATION
| THE RESET BUTTON |
The [RESET] | button is used to enhance synchronization of signals |
after battery replacement or when the unit is operating in an unfavorable way or malfunctioning. Use a blunt stylus to hold down the button. All settings will return to their default values.
PRECAUTIONS
This product is engineered to give you years of satisfactory service if you handle it carefully. Here are a few precautions:
7