Planar PR5030 manual Lamp Problems, Remote Control Problems, Audio Problems

Page 51

DLP® Projector – User’s Manual

2.To ensure the problem is not caused by a connected PC’s video card, connect to another computer.

Problem: The image is flat with no contrast

Adjust the Contrast setting on the Main menu of the OSD.

Problem: The color of the projected image does not match the source image.

Adjust the Color Temperature and Gamma settings on the Main menu of the OSD.

Lamp Problems

Problem: There is no light from the projector

1.Check that the power cable is securely connected.

2.Ensure the power source is good by testing with another electrical device.

3.Restart the projector in the correct order and check that the Power LED is green.

4.If you have replaced the lamp recently, try resetting the lamp connections.

5.Replace the lamp module.

6.Put the old lamp back in the projector and have the projector serviced.

Problem: The lamp goes off

1.Power surges can cause the lamp to turn off. Press the power button twice to turn off the projector. When the Ready LED is on, press the power button.

2.Replace the lamp module.

3.Put the old lamp back in the projector and have the projector serviced.

Remote Control Problems

Problem: The projector does not respond to the remote control

1.Direct the remote control towards remote sensor on the projector.

2.Ensure the path between remote and sensor is not obstructed.

3.Turn off any fluorescent lights in the room.

4.Check the battery polarity.

5.Replace the batteries.

6.Turn off other Infrared-enabled devices in the vicinity.

7.Have the remote control serviced.

Audio Problems

Problem: There is no sound

1.Adjust the volume on the remote control.

2.Adjust the volume of the audio source.

3.Check the audio cable connection.

4.Test the source audio output with other speakers.

5.Have the projector serviced.

Problem: The sound is distorted

1.Check the audio cable connection.

2.Test the source audio output with other speakers.

3.Have the projector serviced.

43

Image 51
Contents Page Planar Systems, Inc User’s Manual Copyright Preface Important Safety Information DLP Projector User’s Manual Preface Main Features DLP Projector User’s Manual Table of Contents Preface Getting Started Packing ChecklistViews of Projector Parts Front-right ViewLabel Description Top view-On-screen Display OSD buttons and LEDsLabel Description See Rear viewLabel Description See Bottom view Remote Control Parts Label Description See Projector and Remote Control Buttons Remote Control Operating RangeInserting the Remote Control Batteries Setup and OperationConnecting Input Devices Audio-out Audio loop-thru Source Description Starting and Shutting down the ProjectorDLP Projector User’s Manual Setting an Access Password Security Lock Adjusting the Projector Level Adjusting the Volume Adjusting the Zoom, Focus and KeystoneOn-Screen Display OSD Menu Settings Navigating the OSDOSD Menu Controls Setting the OSD Language OSD Menu Overview OSD Sub-Menu Overview Image Menu Image Menu Functions Available for Connected Source Advanced Feature Color Manager Computer Menu Computer Menu Functions Available for Connected SourceVideo/Audio Menu Audio Video/Audio Menu Functions Available for Connected SourcesInstallation I Menu DLP Projector User’s Manual Installation II Menu OSD Menu Setting Peripheral Test Status Replacing the Projection Lamp Maintenance and SecurityDLP Projector User’s Manual DLP Projector User’s Manual Resetting the Lamp Cleaning the Lens Cleaning the CaseCleaning the Projector Using the Kensington Lock Troubleshooting Common problems and solutionsTips for Troubleshooting Image Problems LED Error MessagesLamp Problems Remote Control ProblemsAudio Problems Input/output connectors SpecificationsProjection Distance vs. Projection Size Projection distance and size tableVideo Digital Analog KHz Timing Mode TableSdtv Projector Dimensions Canada Safety CertificationsRegulatory Compliance FCC WarningPlanar Systems, Inc