Optoma Technology TH1060P manual Signal Power On

Page 36

User Controls

Note

"IRE" is only supported on NTSC signal.

Automatic: Enable or disable Automatic to automatically select the appropriate settings.

Enabled - the projector will automatically select the appropriate settings.

Disabled - the projector won’t automatically select the appropriate settings.

Frequency: Change the display data frequency to match the frequency of your computer's graphic card. When you experience a vertical flickering bar, use this function to make an adjustment.

Phase: Synchronize the signal timing of the display with the

graphics card. If you experience an unstable or flickering image, use this function to correct it.

H Position: Adjust the horizontal position.

V Position: Adjust the vertical position.

White Level: Allow user to adjust White Level when inputting SVideo or Video/CVBS signals.

Black Level: Allow user to adjust Black Level when inputting SVideo or Video/CVBS signals.

Saturation: Adjust a video image from black and white to fully saturated color. Press the t to decrease the amount of color in

the image. Press the u to increase the amount of color in the image.

Hue: Adjust the color balance of red and green. Press the t

to increase the amount of green in the image. Press the u to increase the amount of red in the image.

IRE: Adjust measurement of composite video signals.

Black Level (for HDMI): Allows user to adjust the Black Level for HDMI signals.

Signal Power On

button.Off: Projector can only be turned on by pressing the "Power"

On:detected.Projector turns on automatically when an active signal is

36

Image 36
Contents Table of contents Projector LED Status Indicator Remote Control Safety Information Important Safety InstructionClass B emissions limits Precautions English Eye Safety Warnings Package Overview DocumentationProduct Overview Main UnitConnection Ports 16. RS232LAN Remote Control Connecting the Projector Connect to NotebookConnect to Video Sources Powering On/Off the Projector Powering On the ProjectorSource button sequentially to switch between devices If more than one input device is connected, pressPowering off the projector Reseller or service center. See pagesAdjusting the Projected Image Adjusting the Projectors HeightAdjusting Projection Image Size Standard projection lens Wide TeleRemote Control Re-Sync HDMI/4How to operate On-screen Display MenusMenu Tree Display Mode ImageContrast Brightness Image Advanced Noise ReductionGamma Display FormatZoom Image ShiftKeystone Closed CaptioningSystem Power Mode Standby Audio SettingsProjector ID RS232System Lamp Settings Brightness ModeLamp Reset Lamp HourSystem Startup Image ImageImage Capture System Network User Controls User Controls For more Setup LanguageInput Filter Auto Power Off SignalSource Lock High AltitudeSignal Power On Reset SecurityTroubleshooting Image is stretched when displaying 169 DVD titleImage No image appears on-screenOther Projector LED Status Indicator If the remote control does not work LED states On Screen MessagesReplacing the Lamp English Lamp Replacing Procedure Compatibility Modes SvideoRS232 Commands and Protocol Function List RS232 Pin Assignments projector sideRS232 Protocol Function List +56&RPPDQG7DEOHOSD/Image/Display/Setup YUV Power Mode Function RS232 command Response Hdmi VGA Ceiling Mount Installation For service or support please contact your local office Optoma Global OfficesLatin America Regulation & Safety Notices FCC noticeRemarque à l’intention des utilisateurs canadiens

TH1060P specifications

Optoma Technology has made significant strides in the realm of projection technology, and one of its standout products is the Optoma TH1060P. This versatile projector is known for delivering exceptional clarity and brightness, making it ideal for both professional and casual use.

The Optoma TH1060P boasts a native resolution of 1920x1080 pixels, ensuring that every image produced is sharp and detailed. This Full HD capability is particularly beneficial for users who require high-definition content for presentations, movies, or gaming. The projector is equipped with a powerful brightness rating of 3,600 ANSI lumens, which means it can produce vibrant images, even in well-lit environments. This characteristic is vital for educational settings or corporate meetings where ambient light may affect visibility.

In terms of technology, the TH1060P utilizes DLP (Digital Light Processing) technology, renowned for its reliability and longevity. DLP projectors are less susceptible to color decay compared to LCD counterparts, making them a preferred choice for extended use. The TH1060P also supports a high contrast ratio of 20,000:1, which enhances the depth of colors and improves the overall viewing experience by providing richer blacks and more vivid colors.

Connectivity is another highlight of the Optoma TH1060P. It features multiple input options, including HDMI, VGA, and USB ports, making it compatible with a wide range of devices, from laptops to gaming consoles. This flexibility ensures that users can seamlessly connect their devices without hassle. Additionally, the projector supports MHL (Mobile High-Definition Link), which allows users to connect mobile devices directly, enabling easy streaming of content.

The TH1060P is designed with portability in mind. Its compact form factor and lightweight construction make it easy to transport between different locations. Furthermore, it incorporates a range of features aimed at enhancing ease of use, such as a built-in speaker and straightforward menu navigation.

In conclusion, the Optoma TH1060P offers a compelling package for users seeking a high-performance projector. With its exceptional brightness, Full HD resolution, reliable DLP technology, robust connectivity options, and user-friendly design, it stands out as an excellent choice for both professional presentations and home entertainment. Whether for business or leisure, the TH1060P is equipped to deliver an immersive viewing experience that meets a wide array of needs.