Optoma Technology TW6153D, TW615GOV Powering the projector On / Off, Powering On the Projector

Page 13

Installation

When Power mode (Standby) is set to Eco (<1W), the VGA output, Audio pass-through and RJ45 will be deactivated when the projector is in standby.

Powering the projector On / Off

Powering On the Projector

1.Remove the lens cap. 

2.Securely connect the power cord and signal cable. When connected, the POWER/STANDBY LED will turn Amber.

3.Turn on the lamp by pressing “” button either on the top of the projector or on the remote. The POWER/STANDBY LED will now turn Green. 

The startup screen will display in approximately 10 seconds. The first time you use the projector, you will be asked to select the preferred language and power saving mode.

4.Turn on and connect the source that you want to display on the screen (computer, notebook, video player, etc). The projector will detect the source automatically. If not, push menu button and go to “OPTIONS”.

Make sure that the “Source Lock” has been set to “Off”.

If you connect multiple sources at the same time, press the “SOURCE” button on the control panel or direct source keys on the remote control to switch between inputs.

2 Power

POWER

?

Turn on the projector first and

then select the	1 Lens Cap
signal sources.

13English

Image 13

Contents Table of Contents Usage Notice Safety InformationPrecautions Do not Product Features Eye Safety WarningsPackage Overview IntroductionMain Unit Product OverviewControl Panel Input/Output Connections Remote Control InstallationConnect to Computer/Notebook Connecting the ProjectorConnect to Video Sources Powering On the Projector Powering the projector On / OffPowering off the projector Adjusting the Projector’s Height Adjusting the Projected ImageAdjusting Projection Image Size Adjusting the Projector’s Zoom / FocusXGA User Controls Control Panel & Remote ControlUsing the Remote Control VGA Using the Help button User Controls User Controls On-screen Display Menus How to operateImage Menu TreeOptions Brightness Display ModeContrast Color SharpnessTint Gamma Color SettingsBrilliantColor Color TempInput Source Color SpaceFormat DisplayLBX Zoom Edge MaskImage Shift Keystone3D Sync. Invert Display 3DScreen Type LanguageProjection Menu Location VolumeProjector ID MuteRS232 WirelessAutomatic PhaseFrequency PositionChange Password Security TimerSecurity User Controls Logo Capture LogoClosed Captioning IP Address Network StateSubnet Mask GatewayHow to use web browser to control your projector Click Change settings of this connection Crestron RoomView Control Tool For more information, please visit Source Lock ResetHigh Altitude Information HideAuto Power Off min Direct Power OnSleep Timer min Power Mode StandbyLamp Reset Brightness ModeLamp Hours Lamp ReminderAppendices TroubleshootingImage is unstable or flickering Image is reversed Projector stops responding to all controls On Screen Messages Replacing the lamp Lamp Replacement Procedure  Computer Compatibility Compatibility Modes Video Compatibility Mode Resolution Sync Hz Sync KHzRS232 Pin Assignments RS232 Commands and Protocol Function ListSend to projector RS232 Protocol Function ListLBX Send to emulate Remote Send from projector automatically Ceiling Mount Installation USA Optoma Global OfficesDeutschland FCC notice Regulation & Safety NoticesRemarque à l’intention des utilisateurs canadiens