User Controls
DISPLAY 3D
“3D sync. Invert” function wouldn’t save the setting. It will set to “Off” when powers on and changes source.
3D Format is only supported on 3D Timing on page 49.
3D Mode
DLP Link: Select “DLP Link” to use optimized settings for DLP Link 3D images. (For DLP glasses, please refer to page 15).
VESA 3D: Select “VESA 3D” to use optimized setting for VESA 3D images. (For 3D emitter, please refer to page 13).
3D -> 2D
3D: Display left and right frames of 3D content.
L (Left): Display the left frame of 3D content.
R (Right): Display the right frame of 3D content.
3D Format
Auto : When a 3D identification signal is detected, the 3D for- mat is selected automatically.
SBS: Display 3D signal in
Top and Bottom: Display 3D signal in “Top and Bottom” format.
Frameformat.Sequential: Display 3D signal in “Frame Sequential”
3D Sync. Invert
Press the “On” to invert left and right frame contents.
Press the “Off” for default frame contents.
English 30