User Controls
On Screen Display Menus
The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect
the source.
How to operate
1.To open the OSD menu, press “Menu 
” on the Remote Control or Control Panel.
2.When OSD is displayed, use 
keys to select any item in the main menu. While making a selection on a particular page, press 
key to enter sub menu.
3.Use 
keys to select the desired item and adjust the
settings by 
key.
4.Select the next item to be adjusted in the sub menu and adjust as described above.
5.Press “Menu 
” to confirm, and the screen will return to the main menu.
6.To exit, press “Menu 
”again. If you don’t press any key, the projector will automatically disappear after 30 seconds. The OSD menu will close and the projector will automatically save the new settings.
Main Menu
Language | Management | PIP |
Image - I | Image - II | Audio |
Brightness
Contrast
Frequency
Phase
Sharpness
Zoom
Sub MenuSetting
English ... 18