Optoma Technology HD81 manual Image Shift Adjustment

User Controls

(*): You can use format setting chage format 2 as 16:9 or LBX, then format can support image shift function, too.

1)Press the “Menu” button on the remote.

2)Use “”, “” to select DISPLAY category and press “Enter” or “”, then use “”, “” to highlight the “Format” adjustment item.

3)Press “Enter” or “” to select this adjustment item. The Menu disappears as shown.

4)Use “”, “” arrow keys to choose the desired format.

5)Once you select Format 1 or 2 on the “Display” menu, any other adjustments to the display that are made can be saved upon exiting the “Display” mode. A reminder window will appear asking for confirmation.

6)User can save settings in the Format 1, 2, or choose “Exit/ Not Saved” to remove the settings. Once the user selects ”Not Saved”, the settings are still temporary and kept until user changes the aspect ratio, signal/channel or HD81 restart.

Image Shift Adjustment

▪The HD81 has the ability to adjust the image position and size to optimize its location on your display by using both an Image Shift and Overscan feature.

▪The function Image Shift can shift the input image up, down, left and right, up to 100 pixels in each direction with Format 16:9, LBX, Format 1.(*)

1)Press the “Menu” button on the remote.

2)Use “”, “” to highlight the DISPLAY category, press “Enter” or “” to select this category. Use “”, “” arrow keys to highlight the “Image Shift” adjustment item.

3)Press “Enter” or “” to enter this adjustment item. A small adjustment bar is shown, and the user may use the “”,

“”, “” and “” keys to move the image to best fit the display device screen.

4)Press the “Shift” button on the remote control to vertically shift the image as well. No horizontal shift is possible from the remote control.

36