Optoma Technology ML300 user manual Select Input, Enter Display Mode

Page 19

How to Use External Input Source: VGA/Composite/AV/HDMI/USB Display/WiFi Display

Selecting Input Source Manually

If more than one external devices are connected to the projector or the projector cannot automatically detect the external device. You have to manually select the input source. To do this, perform the following steps below.

1.Select "Input"

VideoMusicPhoto

Input

Office Viewer

Setup

Press matched symbol to enter specific function directly

Yes No

5.Exit Display Mode

2. Select Input Source

4.Adjust Settings View Source Content

To exit

display mode

Support 3D	Not Support 3D

Zoom in

Volume up

Volume down

Aspect ratio

Not support 3D: Hide button guide

Support 3D: Enter 3D menu

Settings

Return to Home menu

Video

VGA

HDMI

USB Display

WiFi Display

Return to Home menu

3.Enter Display Mode

Display mode

Display

button guide

VGA

800 x 600 60Hz

<Note>

The signal message box briefly appears on screen; its label varies depending on the selected input signal.

Image 19

Contents Mobile LED Projector User’s Manual Eye Safety Warnings Important Safety InstructionQuipment Power On / Off Remote ControlProduct Overview Connect the VGA / Hdmi device Adjust Projected Image Height Adjust the Projected ImageUsing an appropriate cable. ~ Information, see How to useScrew a standard tripod into the screw hole on the projector Use a Tripod StandSubmenu Items How to Use the MenuHome menu SubmenuPlayback File Select Data SourceSelect Video Select Video FileAdjust Settings Select SetupHow to Play Videos Video Playback Mode Select Music Select Music File Select Setup How to Play Music Playback ModeEnter Current Select PhotoPreview File SelectSlideshow Settings Select Setup Select SlideshowHow to View Photos Full Screen Mode / Slideshow Mode Full screen mode Slideshow modeSelect File Select Office ViewerView File How to View Documents View Mode Select Display Setting Adjust SettingsSelect System Select Information Select Setup Select System Select LanguageSelect Language Confirm language / Return to Home menu Return to Home MenuTurn On the Projector Confirm UpgradeWait to Complete Turn Off the ProjectorSelect System Select Keystone Select Setup Select System Select KeystoneConfirm Auto Image Adjust Adjust Image DisplayReset the System Confirm ResetSelect Reset Select Input Enter Display ModeSelect Settings View Source ContentConfirm Setting Scroll Aspect Ratio SettingSelect Settings Select Brightness Select LED ModeSelect Sharpness Select Color ModeSelect 3D Select 3D Mode Scroll 3D Mode Setting3D Input Source Settings Select 3D SyncUpload Files by Computer USB Display ModeSelect Data Transfer Confirm Transfer Unplug the USB Cable Select USB Display Connect to PCSelect Wi-Fi Display Plug in the Wi-Fi DongleWi-Fi Display Wi-Fi Display ModeMedia File Support List Video Compatible VGA / Video ModeAppendix TroubleshootingMedia File Support List Image/Music Bit Rate KbpsEurope Optoma Global OfficesCanada Latin America