Using a Tripod Stand Switch on

1. Screw a standard tripod into the	1. Press the Power button.
screw hole on the projector.

ADJUSTING THE PROJECTED IMAGE

Projection Distance (A)		Screen Size - Width (B)		Screen Size - Height (C)		Screen Diagonal (D)
Meter	inch	(mm)	(inch)	(mm)	(inch)	(mm)	(inch)
0.245	9.6	111	4.4	63	2.5	128	5.0
0.500	19.7	227	8.9	128	5.0	261	10.3
0.700	27.6	318	12.5	179	7.0	365	14.4
0.975	38.4	443	17.4	249	9.8	508	20.0
1.500	59.1	682	26.8	384	15.1	782	30.8
2.000	78.7	909	35.8	511	20.1	1043	41.1
2.500	98.4	1136	44.7	639	25.2	1304	51.3
3.215	126.6	1461	57.5	822	32.4	1677	66.0
		B

1. Adjust Focus (1) until image is clear.

DOWNLOADING THE PC SOFTWARE

Use the PC software to encode and transfer all ﬁle types to the Projector.

To install the PC software:

1.Connect the Projector for data transfer (see previous item).

2.Browse the Projector internal memory (like a USB memory stick) for a folder called "PC Software".

3.In this folder, double-click on the ﬁle called "Setup" or "setup. exe" to begin the installation process, then follow the on screen instructions.

Note: You can ﬁnd Arcsoft license key on Quick Start Guide

4.After the installation, the "Arcsoft Media Convertor" application is launched.

5.To convert and transfer ﬁles to the Projector, drag and drop ﬁles to the Arcsoft Media Convertor application window.

THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG- 4 VISUAL STANDARD ("MPEG-4 VIDEO") AND/OR (ii) DECODING MPEG-4

VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO.

NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM.

HOW TO USE THE MENU

Main menu

	1.	Display the Main Menu. (		)
	2.	Highlight the desired option (		)
	3.	Enter the desired option. (		)
	4.	Highlight the desired item. (		▲▼)
	5.	Select the item. (	)
	6.	Press ( ) to go up one directory.
	Under external signal mode, press ( )
	to bring out the OSD.
	• The OSD disappears in 5 seconds if
Item		there is no OSD operation.
Item	•	The projector will automatically shut
		down if the projector is left idle at
		its main menu or ﬁle browser for 3
		its main menu or ﬁle browser for 3
		minutes.
		<Note>
		External signal mode is applicable for
		connecting VGA, Composite, HDMI and
		Component signals.

	<Note>
	The ﬁrst time you use the projector, you
F	can select your preferred language from
	the quick menu after the startup screen
	displays.

Optoma Technology PK201BUNDLE manual Using a Tripod Stand Switch on, Adjusting the Projected Image