Optoma Technology HD82 manual Other Problems

Page 39

Appendices

Image is too small or too large

Adjust the zoom lever on the top of the projector.

Move the projector closer to or further from the screen.

Press [Menu] on the projector panel, go to “Display-->Format”. Try the different settings.

Image has slanted sides:

If possible, reposition the projector so that it is centered on the screen and below the bottom of the screen.

Use “Display-->V Keystone” from the OSD to make an adjustment.

English

Image is reversed

Select “System-->Projection” from the OSD and adjust the projec- tion direction.

Other Problems

The projector stops responding to all controls

If possible, turn off the projector, then unplug the power cord and wait at least 20 seconds before reconnecting power.

Lamp burns out or makes a popping sound

When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the “Replacing the Lamp” section on page 42.

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Table of contents Safety Information Important Safety InstructionClass B emissions limits Precautions Do not English Eye Safety WarningsPackage Overview IntroductionMain Unit Product OverviewConnection Ports Pure Remote ControlBackup Remote Control Coin Cell Battery ReplacementMenu Connect to Notebook/DVI/VGA-In Connecting the ProjectorConnect to Video/SCART Powering On the Projector Powering On/Off the ProjectorPowering off the projector Adjusting the Projector’s Height Adjusting the Projected ImageAdjusting the vertical image position Adjusting Projected Image Position Using PureShiftUser Controls Adjusting the horizontal image positionPureShift Range Diagram Adjusting Projection Image SizeRemote Control Re-Sync Edge MaskDown Letter BoxOn-screen Display Menus How to operateMenu Tree Mode ImageColor Color Temp Image AdvancedNoise Reduction GammaPureEngine DynamicBlackRGB Gain/Bias PureMotion Image Advanced PureEnginePureDetail PureColorFormat DisplayOverscan Edge MaskKeystone SuperWide Image AI SystemMenu Location Projection12V Trigger B Test PatternBackground Color 12V Trigger aUser Controls Lamp Hour System Lamp SettingsBright Mode Lamp ResetSetup LanguageInput Source High Altitude Auto Power OffSignal Source LockReset No image appears on-screen TroubleshootingImage Problems Image is stretched when displaying 169 DVD titleOther Problems LED states Projector Status IndicationRemote Control Problems If the remote control does not workOn Screen Messages Replacing the Lamp To replace the lamp module, reverse the previous steps Lamp Replacing ProcedureCompatibility Modes Mode Resolution Frequency AAnalog DigitalRS232 Pin Assignments RS232 Commands and Protocol Function ListRS232 Protocol Function List RS232 Command TableRGB Ceiling Mount Installation  Screw type M6  Maximum screw length 12mm Minimum screw length 10mm USA Optoma Global OfficesChina Regulation & Safety Notices Remarque à l’intention des utilisateurs canadiens

HD82 specifications

Optoma Technology has made a name for itself in the world of projection systems, and the HD82 model stands out as a remarkable home theater projector. Designed to provide a true cinematic experience, the HD82 is packed with features and technologies that make it a top choice for both movie enthusiasts and casual viewers alike.

At the heart of the HD82 is its impressive full HD 1080p resolution, offering stunning image quality that brings every detail to life. This high resolution ensures sharp, clear images with incredible color accuracy, allowing viewers to appreciate the subtle intricacies of their favorite films. With a brightness level of 1500 ANSI lumens, the HD82 performs well in both dark and moderately lit environments, providing flexible installation options.

One of the standout features of the HD82 is its advanced DarkChip3 technology, which enhances contrast ratios dramatically. With a remarkable contrast ratio of up to 50,000:1, the projector delivers deep blacks and vibrant colors, making the viewing experience immersive. This technology is particularly beneficial for watching action films or nature documentaries, where rich visuals are paramount.

The HD82 also boasts a remarkable color gamut, covering up to 120% of the NTSC color space. This means that viewers can expect exceptionally vivid colors that make the visuals pop off the screen. Coupled with the projector’s ability to reproduce accurate skin tones, users can enjoy content as it was intended by the creators.

Connectivity options are another strength of the HD82, which includes HDMI, VGA, and composite inputs, making it compatible with a wide range of devices. It also features a built-in 12V trigger for external control, allowing for easy integration into smart home systems.

For enhanced audio experiences, the HD82 is equipped with an onboard 10-watt speaker, though users are encouraged to connect to external audio systems for the best sound performance.

In terms of durability and convenience, the HD82 uses a long-lasting lamp rated for up to 4000 hours in standard mode and up to 6000 hours in eco mode, reducing the frequency and cost of replacements.

Overall, the Optoma HD82 is a powerful home theater projector that combines cutting-edge technology with versatility and ease of use. Whether for movie nights, sports viewing, or gaming, the HD82 is designed to deliver a captivating visual experience that family and friends will enjoy for years to come.
Top Page Image Contents