Optoma Technology EP585 specifications Bottom Screws Head Screw

Page 20

20

English

3.Unscrew the two screws on the bottom of the lamp module. Then release the head screw of the lamp module.

Bottom Screws

Head Screw

4.Take out the used lamp from the usage position. Take out the head of the lamp first and then the bottom. Be careful of the hot lamp.

Bottom Lamp

Head Lamp

5.Replace a new lamp.

Hold the new lamp by its base (we suggest you to put gloves on) and then push it firmly into the usage position. Remember to push the bottom of the lamp back to its position first and then the head. Tighten the screws.

Lamp Base

Lamp

Lamp Base

Warning: Never touch the glass or white powder of the lamp as finger oil, dust or water will damage the lamp.

6.Close the metal cover and then tighten the screws.

Close the lamp door and then tighten the screw beside the lamp latch.

Image 20

Contents Table of Contents Precautions Usage NoticeIntroduction About the ProductPackage Overview Remote Mouse PackageMain Unit InstallationProduct Overview Remote Control Start Your Installation Connecting the Projection DisplayRemote Control Connections Setting Up ProcedurePowering Off the Projection Display Powering On/Off the Projection DisplayPowering On the Projection Display Adjusting the Image Size Positioning the projection displayPanel Control User ControlsUser Control Overview OSD Menus LanguageFunction Descriptions Basic FunctionsPresentation Functions computer source Tracking Frequency Custom Memory Auto ImagePresentation Functions -- video source 4Color/TintTint from OSD menus 4Freeze Press the Freeze button to still the screen imageTroubleshooting Problem No image appears on screenProblem Partial, scrolling or incorrectly displayed image AppendicesProblem Image is unstable or flickering Problem Image has vertical flickering barMaintenance Changing the LampBottom Screws Head Screw Fuse Changing Procedure Changing the FuseSpecifications IBM & Vesa VGAMode Resolution Frequency KHz Compatibility Modes