Appendices
Ceiling Mount Installation
1.To prevent damaging your projector, please use the Optoma’s recommended mount package for installation.
2.If you wish to use a third party ceiling mount kit, please ensure the screws used to attached a mount to the projec- tor met the following specifications:
Please note that damage result- ing from incorrect installation will invalidate the warranty.
Warning:
1.If you buy the ceiling mount from other company, please ensure that there is at least 10cm distance between the bottom cover of the projector and the ceiling.
2.Avoid placing the projector near sources of heat such as
Screw type: M3
Maximum screw length: 10mm
Minimum screw length: 7.5mm
English 50