Interex MHL331D manual 18,330* 18,330

HEIGHT	UNDERCARRIAGE			REACH ft
ft	STABILIZERS	15	20	25	30	35
30	non supported		(11,070)	(7,500)
	4-pt. supported		14,210* (14,210*)	11,120* (11,120*)
25	non supported		(11,010)	(7,550)	(5,390)
	4-pt. supported		14,220* (14,220*)	12,100 (12,720*)	8,820 (8,860*)
20	non supported	(17,060)	(10,650)	(7,370)	(5,360)
	4-pt. supported	18,330* (18,330*)	15,140* (15,140*)	11,910 (13,120*)	8,790 (10,880)
15	non supported	(15,780)	(10,040)	(7,050)	(5,210)
	4-pt. supported	21,810* (21,810*)	16,590 (16,780*)	11,560 (13,920*)	8,620 (10,710)
10	non supported	(14,120)	(9,300)	(6,670)	(5,010)	(3,380)
	4-pt. supported	25,240 (26,150*)	15,740 (18,720*)	11,130 (13,950)	8,410 (10,480)	6,610 (8,240)
5	non supported	(12,850)	(8,650)	(6,310)	(4,820)	(3,800)
	4-pt. supported	16,910* (16,910*)	15,000 (19,230)	10,740 (13,530)	8,200 (10,260)	6,520 (8,150)
	non supported	(12,410)	(8,310)	(6,100)	(4,700)
0
	4-pt. supported	13,930* (13,930*)	14,550 (18,750)	10,460 (13,240)	8,050 (10,110)
-5	non supported			(5,960)
	4-pt. supported			10,350 (13,120)

Capacity values are stated in (lbs). The pump pressure is 5,221 psi. The values, in accordance with ISO 10567, amount to 75% of the static tipping load or 87% of the hydraulic lifting force (marked *). They apply to slewing operations through 360° on a firm and level surface. Values in brackets apply to the longitudinal direction of the undercarriage. “Non-supported” values only apply when the load is hoisted above the front or rear axle. The weight of the attached hoisting equipment (grab, coupler, magnet, lift hook, etc.) must be deducted from the capacity values. In accordance with CE guidelines, hose-rupture protection valves on the lift cylinders and an overload warning device are required for crane operations.

11