Onkyo CR-N7 instruction manual Timer Function, Colors of the TV Picture Bleed

Page 55

Troubleshooting—Continued

No sound is heard from the connected device.

Make sure that the optical digital cable is not bent or damaged.

Set the digital output to PCM, because the CD receiver supports only PCM signals.

The turntable sounds still.

Make sure the turntable has a built in phono equalizer.

If the turntable has no phono equalizer built in, you must provide one separately.

Timer Function

Timer playback or recording does not work.

The clock should be set correctly.

If the clock is not set, playback or recording does not work. Make sure you program the current time. (See page 44.)

Timer operation is not activated if the power to the unit is turned on before the timer On time. Be sure to place the unit in Standby mode before timer operation starts. (See page 51.)

Programmed time may overlap with another timer. Be sure to set multiple timers such that time ranges do not overlap. (See page 47.)

If you try to set the Sleep timer or press TIMER during timer operation, the current timer setting is cancelled.

The timer operation uses the volume level that was set before the unit was placed in Standby mode. Set an appropriate volume level before you place the unit in Standby mode. (See page 51.)

Make sure that the cable and analog audio cables are connected correctly.

If you selected an external Onkyo CD recorder for the timer operation, you must specify the source name. (See page 20.)

Time display is not visible during Standby mode.

Turn the current time display on while the unit is in Standby mode. (See page 46.)

The Colors of the TV Picture Bleed.

Locate the speakers far from the TV.

Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by unit’s mal- function.

Before you record important data, make sure that the material will be recorded correctly.

This product uses a microcomputer to perform various advanced functions. However, noise, radio interference, or static electricity could occasionally cause the unit to malfunction. In this case, unplug the power cable from the AC outlet, then plug it in again in five seconds.

55

Image 55
Contents CR-N7 Avis Important Safety InstructionsPower PrecautionsInstalling this Unit Supplied Accessories FeaturesPrecautions Installing the Batteries Before Using This UnitUsing the Remote Controller Table of Contents Table of Contents Front Panel Part Names and FunctionsDisplay Part Names and FunctionsFM Antenna 14 Rear PanelLine AM Antenna 14Remote Controller Supported Discs Disc NotesMP3 Disc NotesAttach the FM antenna, as shown Connecting AntennaConnecting the Indoor FM Antenna Connecting the AM Loop AntennaUsing a TV/FM Antenna Splitter Connecting AntennaConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaTips Connecting SpeakersConnecting the Speakers PlacementCables & Jacks Connecting External DevicesConnecting a Subwoofer About ConnectionsTip Connecting External DevicesConnection for TV Audio Signal Connecting an Onkyo Stereo Cassette Tape DeckJack connection enables you to use the following functions Connecting an RI Dock Remote Interactive DockAbout the Optical Digital OUT Connector Connecting an Onkyo Compact Disc RecorderTo turn off ACCUCLOCK, press Connecting the Power CordFirst Time Setup European model only Turning Off Accuclock European model onlyTurning the Unit On and Standby Listening through the HeadphonesAdjusting the Volume Understanding Common OperationsUnderstanding Common Operations Adjusting BassAdjusting Treble Emphasizing the Low End Using the Remote ControllerSelecting the Track to Play Playing a CDLocating a Particular Point in a Track Changing the Display Information Playing a CDSelecting MP3 Tracks in Navigation Mode Selecting MP3 Tracks in All Group Mode Disc that contain MP3 tracks Selecting MP3 Tracks in 1-Group ModeMode and the name of the first group CD receiver enters All GroupTrack you want to play back, then Various Ways to Play CDsMemory Playback Turn Multi JOG to select the firstRandom Playback Various Ways to Play CDsRepeat/1 Track Repeat Playback Cancels Memory and Random modes Cancelling the Playback ModeCancels Repeat or 1 Track Repeat mode Items MP3 PreferencesTrk/Grp Num? Display/Not Display MP3 PreferencesCD Extra? Audio/MP3 Joliet? Use SVD/ISO9660Programming Radio Stations Programming FM/AM Stations One by One Preset WriteProgramming Radio Stations Customizing the Preset ChannelsPress Input / to display FM Programming FM Stations Automatically Auto PresetListening to an FM/AM Station Adjusting the AntennaListening to an FM/AM Station Manually Tuning a Broadcast StationAdjust the volume level Selects a preset channelWhat is RDS? Switching the Display InformationReceiving RDS Tips for Changing the Preset Channels Changing the FM/AM Preset ChannelsCopying a Preset Channel Preset Copy Erase Changing the FM/AM Preset ChannelsErasing a Preset Channel Preset Multi JOG until PresetErase?Correcting and Erasing a Character Naming Preset ChannelsNaming a Preset Channel Entering a NameInserting a Character Naming Preset ChannelsErasing the Name Assigned to a Preset Channel Inputting Characters from the Remote ControllerUse / to tune into the FM station Setting the ClockSetting Accuclock to Use a Specific Station Press TimerSetting the Clock Manually Setting the ClockChecking the Time and the Day of the Week To Switch between the 12-hour and 24-hour DisplaysAbout the Timers Using the Timer FunctionsAbout the Sleep Timer Checking the Remaining Time Using the Timer FunctionsUsing the Sleep Timer Canceling Sleep TimerTurn Multi JOG to select the preset num- ber Programming a TimerRepeatedly press Timer to select the desired timer number Turn Multi JOG to selectTimer Play or Timer RecTurn Multi JOG to select the last day Turn Multi JOG to select Once or EveryTurn Multi JOG to select the days of the week Turn Multi JOG to select the first dayPlace the unit in Standby mode Turn Multi JOG to set the On time of the timer operationTurn Multi JOG to set the Off time for the timer operation Turn Multi JOG to set the volumeViewing the Timer Settings Switching the Timer On and OffPower TroubleshootingAudio Connection with External Devices TroubleshootingRemote Controller TunerColors of the TV Picture Bleed Timer FunctionTuner Section SpecificationsGeneral Amplifier Section

CR-N7 specifications

The Onkyo CR-N7 is a compact yet powerful network CD receiver that brings high-fidelity sound to any audio enthusiast's setup. Known for its versatile functionality, this device seamlessly integrates various audio sources while maintaining a sleek and modern aesthetic that fits well in any living space.

One of the standout features of the CR-N7 is its ability to play a wide range of music formats. It supports traditional CD playback, as well as high-resolution audio files. This includes formats like FLAC, WAV, and DSD, delivering an immersive listening experience that captures the nuances of each recording. With a high-quality 2-channel amplifier built-in, it provides a robust output of 40 watts per channel, ensuring that every note is projected with clarity and power.

The Onkyo CR-N7 is equipped with advanced wireless technologies, allowing users to stream music effortlessly from their devices. It features Bluetooth connectivity for easy pairing with smartphones and tablets, as well as Wi-Fi for direct access to a vast array of online music services. With support for popular services like Spotify, Tidal, and Amazon Music, users can explore an extensive library of music without the need for physical media.

Additionally, the CR-N7 supports the latest BLP (Bluetooth, LAN, Wi-Fi, and Ethernet) connectivity, enabling a variety of networked audio options. This allows for seamless integration into existing home audio systems, and provides access to high-fidelity streaming protocols such as AirPlay 2 and Google Cast. Moreover, with Multi-room capability through Onkyo's Controller app, users can easily extend music throughout their home.

The build quality of the Onkyo CR-N7 is equally impressive, featuring a solid, premium chassis designed to minimize vibration and interference. This ensures optimal sound performance while enhancing durability. Furthermore, it includes a user-friendly front panel with a clear display and easily accessible control buttons, making it simple to operate even for those who are not tech-savvy.

In conclusion, the Onkyo CR-N7 is a versatile and high-performance CD receiver that caters to audio enthusiasts looking for a compact yet powerful solution. With its diverse connectivity options, support for high-resolution audio, and solid build quality, it stands out as an ideal choice for contemporary audio setups. Whether you are revisiting your CD collection or discovering new music online, the CR-N7 delivers an exceptional listening experience.