InFocus X8 quick start Troubleshooting, If there is no picture or the picture is blank

Page 7

Troubleshooting

If there is no picture or the picture is blank

If the power light is off, make sure the power cord is connected and plugged into a live electrical outlet. If the power light is amber and not blinking, press the power button.

Check video source and cables. Make sure the video source (computer, DVD player, VCR, etc.) is turned on and cables are securely connected between the source and the projector.

 

Make sure your computer's video port is enabled. Press the key combination

 

that activates your laptop's external video port (see step 4 ). If there is still no

source

image, restart your laptop.

 

Press the Source button. You may need to press it several times to view the correct source.

Press the Auto Image button.

If "Signal out of range" is shown, or the picture looks bad

Press the Auto Image button. If that doesn't help (and the source is a computer), reduce your computer's display resolution or vertical refresh rate.

If the replace lamp light is on

Turn the projector off and wait at least one minute, then turn it on again. If the replace lamp light turns on again, the lamp needs to be replaced. For lamp replacement instructions, see the Reference Guide, which is on the included CD-ROM or can be downloaded at www.infocus.com/support

If the high temperature light is on

Turn the projector off and remove anything that may be blocking the air vents on its side. Leave the projector off for at least one minute to let it cool before turning it on again. IMPORTANT: Continuous operation at high temperature may reduce the lifetime of the lamp and/or projector.

If the service required light is on

Turn the projector off and wait at least one minute, then turn it on again. If the service required light turns on again, the projector needs to be serviced. See below for service contact information.

More troubleshooting options are in the Reference Guide

The Reference Guide is on the included CD-ROM, or download it at www.infocus.com/support

Warning: In the unlikely event of a lamp rupture, particles may be ejected from the projector. Keep out of the area under and around the projector when it is turned on. See the safety instructions booklet for more details.

Image 7
Contents Quick Start Unpack the box Power/Standby Service Required High TemperatureGot an Apple computer? USB is optional Connect sourceAvailable from A/V dealer or retailer Turn on computer or other source Turn on projector and sourceTurn on the projector Wait for the lamp to warm upZoom and focus Adjust the pictureHeight KeystoneRead the Reference Guide Press the power button twiceTurn off the projector Register your productIf there is no picture or the picture is blank TroubleshootingIf Signal out of range is shown, or the picture looks bad If the service required light is on+1 503 Singapore +65 +31 036 539 Toll Free China Questions? We’re here to helpAustralia