Operation
Powering On/Off the Projector
Powering On the Projector
1.Remove the lens cap.
2.Ensure that the power cord and signal cable are securely connected. The Power LED will turn flash blue.
3.Turn on the lamp by pressing “Power/Standby” on the control panel. The startup screen will display for about 25 seconds and the Power LED will turn blue.
4.Turn on your source (computer, notebook, video player,etc.)
The projector will detect your source automatically.
If you connect multiple sources at the same time, use the “source” on the remote control or use the “computer“, ”video 1”, “video 2“ on the remote control to switch.
Turn on the projector first and then the signal sources.
1
2 Power/Standby
Lens Cap
English ... 12