InFocus IN112a, IN116a, IN114STa 1Turn off the projector and unplug the power cord, Advanced Menu

Page 34
1Turn off the projector and unplug the power cord.

1Turn off the projector and unplug the power cord.

2Wait 60 minutes to allow the projector to cool thoroughly.

3Remove the lamp door, located on top of the projector, by removing the screw on the side of the lamp door, sliding the door right, and lifting the lamp door off.

4Loosen the captive screws that attach the lamp housing to the projector. NOTE: If the projector is installed on a ceiling mount, be careful not to drop the lamp module once the captive screws are loosened.

5Carefully lift the lamp straight up, off of the alignment pins; being careful not to pinch the lamp connector. Dispose of the lamp in an environmentally proper manner.

6Install the new lamp module, aligning the pins properly. Be careful not to pinch the lamp connector.

7Tighten the screws. (NOTE: If the pins have not been aligned properly, the screws will not tighten securely.)

8Replace the lamp door by (a) putting the lamp door down and (b) sliding it until it locks.

9Replace the lamp door screw and tighten securely.

10Plug in the power cord and press the Power button to turn the projector back on.

11To reset the lamp hour timer, navigate to the Advanced Menu > Status/Service menu and select Reset Lamp Hours....

turn off and unplug projector

(Advanced Menu )

Image

Source Info...

Setup

Projector Info...

Status/Service

Reset Lamp Hours...

 

Factory Reset...

Basic Menu

Service Code...

wait 60 minutes

loosen screws

MDL: IN112a

FW: 0.14

32

Image 34
Contents Page Page FCC Warning Declaration of ConformityTrademarks CanadaTable of Contents Important Operating Considerations for Safety Introduction Product specificationsAccessories Online registrationIN112a/IN114a/IN116a/IN114STa Connector panelIN112aT/IN114aT Positioning the projector VGA connection Connecting a computer sourceConnecting power HDMI connectionDisplaying an image Adjusting the image Video device connections Connecting a video deviceComponent video connection Composite video connectionShutting down the projector Troubleshooting your setupTable 4 Status Indicator Lights Auto Off TimeRestart laptop Page Advanced Menu Adjust horizontal orvertical position in Image PC... menuProblem COLOR COLORStartup Screen Result ProblemSolution Lamp must be replaced see pageUsing the remote control Troubleshooting the remoteUsing the projector’s speakers Using the audioTroubleshooting Audio Using the keypad buttons Presentation features Optimizing computer imagesOptimizing video images Customizing the projectorUsing the menus Basic Menu Advanced Menu ImageKeypad/Remote Settings SetupAudio Setup Image SetupPower OSD SetupPIN Settings LampTimer Status/ServiceHigh Altitude Setting Cleaning the lens MaintenanceUsing the security lock Replacing the projection lamp 1Turn off the projector and unplug the power cord Advanced MenuNumerics
Related manuals
Manual 36 pages 12.54 Kb

IN114aT, IN112a, IN112aT, IN114a, IN114STa specifications

The InFocus series of projectors, including the IN114STa, IN118HDSTa, IN118HDa, IN112a, and IN114aT, showcases remarkable advancements in projection technology, making them ideal for both personal and professional usage.

The IN114STa is a short-throw projector, designed for small spaces while delivering impressive image quality. It projects a 100-inch image from just under five feet away, making it perfect for classrooms or small meetings. Armed with a brightness of 3,500 lumens and a 20,000:1 contrast ratio, it ensures clear, vibrant images even in well-lit environments. The IN114STa also features multiple connectivity options including HDMI, USB, and VGA, allowing for easy integration with various devices.

On the other hand, the IN118HDSTa offers full HD 1080p resolution, elevating the viewing experience for presentations, videos, and gaming. With the same short-throw technology, it captures attention without necessitating large spaces. The IN118HDSTa boasts 3,600 lumens of brightness paired with a 20,000:1 contrast ratio, ensuring vivid colors and sharp details. This model also supports MHL-enabled devices, making it a versatile choice for tech-savvy users.

The IN118HDa stands out with its high-definition capabilities while maintaining an affordable price point. It features 3,600 lumens of brightness and a native 1080p resolution, ensuring clear visuals for any content. The IN118HDa is also equipped with enhanced color management features, allowing users to fine-tune their settings for optimal picture quality.

The IN112a continues the trend of high-quality projection with its lightweight design and built-in speaker, making it an excellent choice for portable presentations. With 3,200 lumens of brightness, it’s capable of delivering great visuals in various lighting conditions. The 20,000-hour lamp life reduces the need for frequent replacements, enhancing usability.

Lastly, the IN114aT model integrates a touch screen feature, elevating the interactivity of presentations. Similar in brightness and resolution to its counterparts, it introduces a unique, intuitive way to engage an audience.

Collectively, these projectors embody InFocus’s commitment to quality, versatility, and user-friendly technology, making them a solid choice for anyone seeking advanced projection solutions. Their blend of features and cutting-edge technology meets diverse needs in education, business, and home entertainment.