InFocus LP860, LP850 manual Screen Save

Page 36

Screen Save: automatically blanks the screen after no signals are

 

 

detected for five minutes. The image returns when an active source is

 

 

detected or a remote or keypad button is pressed. Screen Save is disabled

 

 

when Power Save is enabled.

 

Screen Save

 

 

Startup Logo: allows you to display a blank Black, White, or Blue screen

 

 

instead of the default screen at startup and when no source is detected. It

 

 

also allows you to capture and display a custom startup screen.

 

 

To capture a custom logo, display the image you want to capture on your

 

 

computer and select the Logo Capture option. From the Logo Capture

 

 

menu, use the Capture Position X and Capture Position Y adjustments to

 

 

frame the logo to be captured. Press Capture Start in the Logo Capture

 

 

menu. The projector will let you know if the capture was a success or a

 

 

failure.

 

 

The next time you start the projector, the custom logo you captured dis-

 

 

plays.

Startup Logo

Logo Capture

 

Blank Screen: determines what color is displayed when you press the

Blank button on the remote.

Blank Screen

36

Image 36
Contents USER’S Guide Trademarks Table of Contents Important Operating Considerations for Safety Accessories Projector components and features backIntroduction Online RegistrationConnector Panel Positioning the projector Connecting a computer Required computer connectionsOptional computer connections Visit our website for information on ProjectorNet Displaying a computer image First-time projector use with Windows Wizard launches two times For Windows 2000, Windows ME, and Windows XPAdjusting the image Connecting a video device Standard video connectionsOptional video connections Connect BNC cables Displaying a video image You can also adjust the zoom and focus via the menus. See Troubleshooting your setup Power SaveShutting down the projector Screen SaveSolution Computer image projectedRange Out Image clear and not cropped Page Color Lamp won’t turn on, Temp LED solid red Lamp won’t turn on, Lamp LED blinking redLamp may need to be replaced Lamp turns on Still having problems? Using the keypad buttons Using the remote control Troubleshooting the remoteUsing the audio Troubleshooting audioConnecting external speakers Presentation features Optimizing computer imagesOptimizing video images Customizing the projectorUsing the menus Picture menu Presets Advanced settings Settings menu Screen Save PiP Enable PiP Position Effect Key Network Maintenance Cleaning the lensChanging the lens Replacing the projection lamp Resetting the lamp timer Cleaning the dust filter Using the security lockTroubleshooting Appendix Projected image sizeWidth Image Feet/m LED Behavior LED color/behavior MeaningRS-232 commands Communication ConfigurationCommand Format Setting ValueError Conditions LimitationsINT at RW Disable Enable IR Receiver front IRF at RW = Japanese = Korean = Portuguese = Russian = Norwegian NND Page Ntsc Index NumericsPage XGA Limited Warranty Warranty Limitation and ExclusionDisclaimer of Unstated Warranties
Related manuals
Manual 60 pages 13.05 Kb