FIGURE 7
Connecting a mouse via the PS/2 connector
If your Macintosh computer has an ADB connector, use the ADB mouse adapter and the
1Plug one end of the ADB mouse adapter into the mouse con- nector on your computer.
2Plug the other end of the ADB mouse adapter into the
3Plug the other end of the
NOTE: You do not need to restart your computer after connecting a USB mouse to use it (it is
FIGURE 8
Connecting a mouse via the ADB connector
Now you’re ready to power up the projector and your computer. Skip to “Powering up the Projector and Adjusting the Image” on page 11.
9