InFocus LP290, LP280 manual Turning Off the Projector

Page 22

S e t t i n g	u p	t h e	P r o j e c t o r

NOTE: To maximize lamp life,

allow the projector to run for at

least five minutes before turning

it off.

Turning Off the Projector

To turn off the projector, press the Power button. A dialog box appears, asking for confirmation. Press the Power button again to turn the lamp off. The fans continue to run for a minute, then the projector shuts off.

If you want to turn the lamp back on, you must allow 90 seconds for the lamp to cool. The lamp won’t light if it’s too hot.

If you want to turn off the projector for a short period of time, press the Power button twice. This puts the projector in standby mode. The lamp goes out, and the fans run and the LED blinks orange for 1 minute. After 1 minute, the fans turn off and the LED lights solid orange. To exit standby mode and return to normal operation, press the Power button.

14

Image 22

Contents LP280/290 Page FCC Warning Canada Safety CertificationsEN 55022 Warning Declaration of Conformity Australian Certification C-tick mark TrademarksTable of Contents Appendix IndexSafety Definitions Safety Symbols Safety InstructionsSafety Terms Customer Service Important Operating ConsiderationsLP280 Image ResolutionIntroduction LP290Unpacking the Projector CompatibilityDiately if anything is missing Shipping box contents Rear view of projector Usage Guidelines If You Need AssistanceWarranty Setting UP the Projector F tT t i n g O j e c t o r Connecting a Computer Do you want to play your computer’s audio on the projector?T t i n g O j e c t o r Connecting a Video Player T t i n g O j e c t o r Powering up the Projector Turning Off the Projector Basic Image Adjustment Using the ProjectorAdjusting the Projector I n g O j e c t o r Using the Remote Control Menu Using the Keypad and Remote ButtonsPower Source/Select keypad only or Computer and Video remote onlyArrow buttons VolumeKeystone Contrast remote only Black remote onlyEffect remote only Brightness remote onlyUsing the On-Screen Menus Brightness Basic MenuContrast ColorReset SetupAbout Setup menu Picture menuSystem menu Language menu Effect menuService menu Userlogo menu Cleaning the Lens Maintenance & TroubleshootingCleaning the Dust Filters I n t e n a n c e Troubleshooting Replacing the Projection Lamp Replacing the Batteries in the Remote Control Using the Security Lock Problem The projector is not running TroubleshootingLEDs Problem The screen resolution is not right Problem Only the start-up screen displaysProblem Color or text not being projected Problem Image isn’t centered on the screenProblem Image and menus are reversed left to right Problem Image is too wide or narrow for screenProblem Image is out of focus Problem Projected image is distortedPage I n t e n a n c e Troubleshooting Specifications AppendixAccessories Standard Accessories Ship with the projector Part NumberOptional Accessories HW-RF-REMLSRPortable and Laptop Activation Chart Key command to Computer Activate port De-activate portFN-F6 FN-F4 FN-F1 NCR Wyse Software driven Zenith FN-F10 Using Video Mirroring with a PowerBook Computer Using SimulScanProjected Image Size Index NumericsD e Page D e Limited Warranty InFocus-Branded ProductsWarranty Limitation and Exclusion

Related manuals

Manual 60 pages 24.42 Kb