InFocus LP 740 warranty Using the Projector, Basic Image Adjustment, Adjusting the Projector

Page 15

USING THE PROJECTOR

This section describes how to use and make adjustments to the projector. It also provides a reference to the remote and keypad buttons and the options available from the on-screen menus.

Basic Image Adjustment

1Make sure you have powered up your equipment in the right order (page 9). Press the Auto button on the remote or choose “Auto Set Up” (page 19) in the menus to optimize the image.

2If the image doesn’t display completely, adjust the zoom, adjust the height of the projector (page 12) or center the image by adjusting its horizontal or vertical position (page 19). Be sure the projector is at a 90 degree angle to the screen.

3If the image is out of focus, rotate the outer focus ring (page 11).

4If the image appears to shimmer or if it has blurry vertical bars after you have adjusted the focus, adjust the Sync or Tracking (page 19).

5If the colors don’t look right, adjust the brightness (page 15).

Adjusting the Projector

To focus the image, rotate the outer focus ring (Figure 11) until the image is clear. To zoom the image, rotate the inner zoom ring.

NOTE: In Focus has created a software program called In Focus Presents that automatically opti- mizes your computer’s display when used with any In Focus pro- jector. This free program is included with every projector and available for download from our website at www.infocus.com.

focus ring

zoom ring

FIGURE 11

Focus ring and zoom ring

11

Image 15

Contents Table of Contents Index AppendixDo Not Look Into The Lens Safety SummaryPower Source Power CordHot Surfaces GroundingLamp Lamp CompartmentUnpacking the Projector Image ResolutionIntroduction CompatibilityT r o d u c t i o n Back view of projector Warranty Usage GuidelinesIf You Need Assistance Setting UP the Projector T t i n g O j e c t o r Do you want to play your computer’s audio on the projector? Connecting a Computer Connecting a Video Player Powering up the Projector and Adjusting the Image Turning Off the Projector Using the Projector Basic Image AdjustmentAdjusting the Projector I n g O j e c t o r Keypad Using the Remote Control and Keypad ButtonsMenu PowerVolume Source Computer, Video, or S-Video on remoteZoom + and Zoom Remote Control Only Buttons AutoRestore BrightMenu Main Using the On-Screen MenusItems are different for video Computer sources Here is the menu structure Image control Video only adjustmentsAudio control Submenu Function Custom setupInformation InformationUsers memory Load Users memory SaveMaintenance & Troubleshooting Cleaning the LensCleaning the Fan Intake Filter Replacing the Projection Lamp Removing the lamp door Installing a new lamp module Problem Image isn’t centered on the screen Troubleshooting Problem Nothing on projection screenProblem Color or text not being projected Problem The screen resolution is not rightProblem Image is too wide or narrow for screen Problem Image is noisy or streaked Problem Image is out of focusProblem Image and menus are reversed left to right Problem no soundProblem Lamp shuts off Problem Lamp seems to be getting dimmerAppendix SpecificationsOptional Accessories AccessoriesKey command to Computer Activate port De-activate port Portable and Laptop Activation ChartFN-F6 FN-F4 FN-F1 FN-F2 FN-F1 FN-F7 FN-F5 Using SimulScan Using Video Mirroring with a PowerBook ComputerDistance to Diagonal Width Height Projected Image SizeImage Size, Width and Height for lens at Minimum Image Size Command format RS-232 Terminal SpecificationsCommunication configuration Setting ValueSupported commands Function Command Meaning Index D e