Adjusting the image
Adjust the height of the projector, if necessary, by pressing the release but- ton to extend the elevator foot.
Rotate the leveling foot, if necessary.
adjust height
rotate level- ing foot
elevator foot
Position the projector the desired distance from the screen at a 90 degree |
|
angle to the screen. | adjust distance |
See page 41 for a table listing screen sizes and distances. |
|
Adjust the zoom or focus rings by rotating them until the desired image size
and sharpness are produced. | adjust zoom and focus |
|
zoom 
focus 
If the image is not square, adjust the keystone by using the buttons on the
keypad.
adjust keystone
Press the upper Keystone button to reduce the upper part of the image, and press the lower Keystone button to reduce the lower part.
Adjust the Contrast or Brightness in the Picture menu.
adjust Contrast or Brightness
See page 29 for help with the menus. | contrast |
brightness
12