Power Save: automatically turns the lamp off after no signals are detected for 20 minutes. After 10 additional minutes with no signal, the projector powers down. If an active signal is received before the projec- tor powers down, the image will be displayed.
Screen Save: automatically blanks the screen after no signals are detected for five minutes. The image returns when an active source is detected or a remote or keypad button is pressed. Screen Save is disabled when Power Save is enabled.
Startup Logo: allows you to display a blank Black, White, or Blue screen instead of the default screen when no source is detected at startup. It also allows you to capture and display a custom startup screen.
To capture a custom logo, display the image you want to capture on your computer and select the Capture New option. From the Capture New menu, use the Capture Position X and Capture Position Y adjustments to frame the logo to be captured. Press Capture Start in the Capture New menu. The projector will let you know if the capture was a success or a failure.
The next time you start the projector, the custom logo you captured dis- plays.
Blank Screen: determines what color is displayed when you press the Blank button on an optional remote.
Screen Save
Capture New
Startup Logo
Blank Screen
32