InFocus C250W, C315 manual Connecting a video device

Page 10

Connecting a video device

No video or audio cables are included with your projector.

If the video device uses a round, four-prong S-video connector, plug an S-video cable into that connector on the video device and into the Video 2 connector on the projector. If the device uses a composite video connector, plug a composite video cable into that connector on the video device and into the Video 1 connector on the projector.

For audio, plug a mini-plug audio Y-cable into the Audio in connector on the projector and into the video device’s left and right audio out connectors.

Connect the black power cable to the connector on the back of the projector and to your electrical outlet.

NOTE: Always use the power cable that shipped with the projector.

To connect a progressive scan EDTV or HD source, use the Component to M1 adapter (sold separately).

connect S-video and audio cables

connect video and audio cables

connect power cable

9

Image 10

Contents Page FCC Warning Declaration of ConformityTrademarks EN 55022 WarningTable of Contents Introduction Connector Panel Connector panelRequired computer connections Connecting a computerOptional computer connections Page Displaying a computer image ? No startup screen? Get help onAdjusting the image Connecting a video device Displaying a video image Page Status indicator light behavior and meaning Troubleshooting your setupShutting down the projector Page No computer image, just the words Signal out of range Image clear and not cropped Square image Page Projected colors don’t match source Lamp won’t turn on, Temperature light is on Still having problems?Lamp must be replaced Lamp turns on Using the keypad buttons Auto image-resets the projector to the sourceUsing the remote control Troubleshooting the remoteTroubleshooting audio Using the audioConnecting external speakers Optimizing video images Presentation featuresOptimizing computer images Customizing the projectorUsing the menus Picture menu Presets Advanced settings Settings menu Startup Logo Custom Key Language Service menu To enter the PIN at projector startup PIN featureTo reset the PIN back to the default To change the PINCleaning the lens MaintenanceUsing the security lock Replacing the projection lamp Resetting the lamp timer Appendix Projected image sizeIndex XGA