Meridian Audio 565 manual General operating problems, Standby point not lit, Remote not working

Page 58

General operating problems

Standby point not lit

Check the following:

❍There is AC power connected to the socket on the rear of the 565.

❍The power switch on the rear panel of the 565 is turned on.

If the 565 will still not illuminate, check any fuses in your power supply and the fuse in the inlet of the 565. If these are all intact, contact your dealer.

Remote not working

Check the following:

Communications not working with other Meridian products

❍Check the connections carefully.

❍Are you using a mix of 200 and 500 Series units?

Erratic or unexpected system behaviour

Redo the Auto Configure process; see Connecting to other Meridian equipment, page 18.

If this fails, the memory of the 565 may have been corrupted. If this is suspected perform a full reset.

Troubleshooting

❍The battery in the Meridian System Remote.

❍Remove the 500 comms connections from the 565, does it respond now? If so, replace the connections and perform an Auto Configure procedure; see Connecting to other Meridian equipment, page 18.

❍See if the 565 is set to Not Controller in Config; see To set other configuration options, page 27. Note that this may be deliberate by your dealer.

I am playing a Dolby Digital DVD, but the 565 selects the Pro Logic preset

DVDs include a 2-channel Dolby Digital soundtrack, which will use the default 2-channel preset.

❍Select a 6-channel soundtrack, if it is available.

54

Page 57 Page 59
Image 58
Page 57 Page 59
Contents Meridian 565 Digital Surround Processor Preface Manufactured in the UK byContents Troubleshooting Setting up sourcesCalibrating the system Introduction IntroductionPlanning a system Three-channel surround system Layout G or L, No SurroundsIntroduction Introduction Using the 565 with Meridian DSP Loudspeakers Surround system with full-range speakers Layout LUsing a LaserDisc player Using an analogue preamplifierUsing a Digital Control Unit Planning sourcesSetting up the digital surround processor To position the digital surround processor Setting up the digital surround processorUnpacking Radio interferenceRear panel Connecting the digital surround processorSetting Video connectionsAudio inputs Audio outputsCommunications connections RS232 connectionSetting up the digital surround Connecting videoOn-screen display To connect to Meridian DSP Loudspeakers eg DSP5000 Connecting speakersTo connect to Meridian Active Loudspeakers Subwoofer To use the digital surround processor as a preamplifier Connecting sourcesTo connect to a 519 Demodulator To connect to a 562 or 562V Digital Control Unit Surr Analogue Tape OUT A4 in Audio Inputs Digital Optical Connecting to other Meridian equipment To connect to other Meridian 500 Series equipmentConfiguring the digital surround processor To select a standard setting Choosing standard settingsProcessor Standard settings Configuring the digital surround processor How to use the table of speaker layoutsSpecifying the speaker layout Small main speakers Speaker layouts To define the shape of the speaker layout To set the speaker layoutDigital surround Configuring the digital surround processor To set other configuration options To select a 5.1 LFE subwooferSetting up the speaker outputs To time-align the systemTo select the output type To set up a speaker outputTo change the settings for a speaker DigitalTo set the output delay To specify the output precision To set up speaker protection for 5.1 sourcesDigital surround processor To specify the type of subwoofer Calibrating the system Calibrating the systemUsing the calibration procedure Using a Sound Pressure Level meterTo exit from the calibration procedure To start the calibration procedureTo move between the calibration tests Calibration tests LevelsMain Centre Phase Front-Rear Surround Sides Subwoofers Other subwoofers LRSWhat next? ADC CheckSystem To select a different test signal Test signalsTo test for room vibrations Setting up sources Setting up sourcesStandard source settings DTS THX Mpeg THXTo configure a source To change an optionOption Initial value Alternative values Explanation MPEG, Mpeg THX To use a source key to change DSP preset Examples of configuring the sourcesTo change a source label To set up a system with two Meridian CD players Setting up sources Troubleshooting TroubleshootingRemote not working General operating problemsStandby point not lit Communications not working with other Meridian productsPoor sound quality Audio problemsHum on analogue input There is radio interferenceAudible hiss at high volume settings Crackling on optical inputsSound not clear There is a hiss when starting DTS LaserDiscsCentre not working Video problems TV does not work using Poor picture qualityIndex IndexLayouts Optical Types
Related manuals
Manual 58 pages 62.83 Kb

565 specifications

The Meridian Audio 565 is a landmark in the realm of high-fidelity audio processing. Launched as a digital surround sound processor, it has captivated audiophiles and home theater enthusiasts with its innovative technology and exceptional sound quality. The 565 serves as a definitive solution for those looking to enhance their audio experience, boasting a range of features that solidify its status in the industry.

One of the main features of the 565 is its advanced digital signal processing capabilities. It utilizes Meridian’s proprietary Apodizing filter technology, which significantly improves frequency response and effectively reduces time-domain distortion. This technology enables precise sound reproduction, allowing listeners to experience their favorite music and movies as intended by the creators.

The Meridian 565 is equipped with multiple inputs and outputs, supporting various audio formats. It features both balanced and unbalanced audio connections, ensuring compatibility with a wide range of audio equipment. This flexibility allows users to seamlessly integrate the 565 into their existing audio systems, whether they are aiming for stereo or surround sound configurations. The device supports multi-channel audio formats, giving users the opportunity to experience immersive soundscapes.

Another noteworthy characteristic of the 565 is its user-friendly interface. It comes with a well-organized remote control and an intuitive on-screen display that simplify the process of configuring and operating the device. Users can easily adjust settings, switch between different input sources, or fine-tune audio parameters to suit their personal preferences.

The build quality of the Meridian 565 is also commendable. Typically housed in a robust chassis, the device is designed to minimize interference from external electromagnetic sources, thus preserving audio integrity. This attention to detail in construction reiterates Meridian’s commitment to delivering high-performance audio solutions.

In conclusion, the Meridian Audio 565 is an exceptional digital surround sound processor that combines advanced technology with user-friendly features. Its unique technologies, such as Apodizing filtering, flexible connectivity options, and robust build quality, make it a top choice for audiophiles and home theater enthusiasts alike. Whether for casual listening or an immersive cinematic experience, the 565 stands as a testament to Meridian's dedication to excellence in audio engineering.
Top Page Image Contents